Protective pillar film GrizzGlass BodyShield for Alfa Romeo Stelvio (2023–2025) set 8-in-1

GrizzGlass BodyShield protective pillar film for Alfa Romeo Stelvio (2023–2025) is a pre-cut 8-in-1 exterior film kit designed to protect the door pillars from scratches, stone chips and everyday wear. The kit fits the Alfa Romeo Stelvio model years 2023 to 2025 and provides a nearly invisible protective layer that preserves the vehicle's paint finish while being suitable for regular urban driving and parking situations.

Advantages

The film is precision-cut to match the shape of the vehicle's door pillars, enabling straightforward installation with minimal trimming. It is thin and optically clear to maintain original paint color and gloss, while offering durable resistance to abrasion and small impacts. The adhesive backing is formulated for secure attachment on exterior surfaces without compromising removal when necessary.

Suitable for

• Protecting door pillars from key scratches and parking dings
• Preventing paint chips caused by road debris
• Maintaining exterior finish in daily urban driving
• Use during frequent loading and unloading near doors

Key specifications

• Application: exterior door pillar protection
• Kit contents: 8 pre-cut film pieces covering front and rear door pillars
• Material: optically clear protective polymer film
• Finish: low-visibility, glossy transparency to match vehicle paint
• Adhesive: pressure-sensitive, designed for automotive exterior surfaces

How to use

Clean the door pillar surface thoroughly to remove dirt, wax and residues before application. Align each pre-cut film piece with the corresponding pillar area, then apply from one edge while smoothing out air bubbles with a soft squeegee or cloth. If necessary, use a heat gun or hair dryer on low heat to conform the film to curved areas and improve adhesion. Trim any excess only when alignment is verified.

Usage recommendations

For best results, apply the film at ambient temperatures between 15–25°C on dry, dust-free surfaces. Allow the adhesive to cure for 24–48 hours before washing the vehicle or exposing it to heavy rain. When removing, heat the film gently and peel back slowly to minimize residue; remaining adhesive can be cleaned with isopropyl alcohol or an automotive adhesive remover.