Protective pillar film GrizzGlass BodyShield for Skoda Superb III Liftback (2019–2023) set 4 pieces

GrizzGlass BodyShield protective pillar film for Skoda Superb III Liftback (2019–2023) is a set of four pre-cut transparent adhesive films engineered to protect door pillars from scratches, stone chips and everyday wear. Each film follows the contours of the vehicle’s B-pillars to preserve the original paint finish without altering the car's appearance. The thin, durable layer provides a nearly invisible barrier that is suitable for daily urban driving and longer trips, and it can be removed or replaced without leaving significant residue.

Advantages

The film is pre-cut to match the B-pillar shapes of the Skoda Superb III Liftback (2019–2023), ensuring precise coverage and simple alignment during installation. Its transparent finish maintains the vehicle’s factory paint colour and gloss while protecting against mechanical damage and small impacts. The material is engineered to resist yellowing and maintain clarity, and the adhesive backing is formulated for secure attachment with the option of clean removal for replacement or maintenance.

Suitable for

• Protecting door pillars from scratches caused by bags, keys and clothing.
• Preventing stone chips and minor paint damage during city and highway driving.
• Maintaining exterior appearance and resale value of Skoda Superb III Liftback (2019–2023).
• Temporary or long-term protection that can be removed without damaging paintwork.

Key specifications

• Set consists of 4 pre-cut protective films for B-pillars.
• Transparent, high-clarity thermoplastic material.
• Thin, flexible construction that follows pillar contours.
• Pressure-sensitive adhesive backing designed for automotive paint surfaces.
• Designed for external use and resistance to daily abrasion and minor impacts.

How to use

Clean the pillar surface thoroughly with a mild detergent and alcohol-based cleaner to remove dirt, wax and grease. Align the pre-cut film to the pillar profile, peel back a portion of the protective liner and apply the adhesive side progressively while smoothing out air bubbles with a soft squeegee or microfiber cloth. Work from one edge to the other to ensure even adhesion. Trim any overlapping edges if necessary and allow the adhesive to set according to ambient temperature before washing the vehicle.

Usage recommendations

For best results, apply the films at moderate ambient temperatures (ideally between 15–25°C) on a dry surface; avoid installation in direct sunlight or immediately after painting. If film removal is required, warm the area slightly with a heat gun or hairdryer and peel slowly at a low angle to minimise stress on the paint. Regular inspection and gentle cleaning with mild detergent will help maintain clarity and performance.