Protective pillar film GrizzGlass BodyShield for BYD Seal U (2024–2025) 8-in-1 set

GrizzGlass BodyShield protective pillar film for BYD Seal U (2024–2025) is a tailored 8-piece set designed to protect door pillars and adjacent exterior surfaces from scratches, chips and everyday wear. Each film piece is pre-cut to match the contours of the specified BYD model, offering discreet, transparent coverage that preserves the vehicle's appearance while guarding vulnerable paintwork from impacts and abrasion.

Advantages

The film provides durable, clear protection without altering the vehicle's finish or color. Its adhesive backing ensures secure fitment to pillar surfaces while allowing for precise alignment during installation. The material resists common road debris and light impacts, reducing the need for touch-up paint or frequent cosmetic repairs. When removed correctly, the film leaves the underlying paint intact.

Suitable for

• Protection of front and rear door pillars on BYD Seal U (2024–2025)
• Preventing chips and scratches from keys, bags and loading/unloading items
• Maintaining resale value by preserving original paint in high-contact areas

Key specifications

• Set composition: 8 pre-cut transparent film pieces shaped for pillar and adjacent areas
• Material properties: high-clarity, abrasion-resistant protective film
• Surface compatibility: automotive exterior paint and clearcoat
• Application area: door pillars and surrounding vertical surfaces
• Finish: near-invisible transparent coating designed to blend with vehicle paint

How to use

Clean the pillar surfaces thoroughly with a lint-free cloth and an appropriate automotive cleaner to remove dirt, grease and wax. Align each pre-cut film piece to the corresponding pillar area and peel the liner gradually while smoothing the film onto the surface to avoid air bubbles. Use a soft squeegee or microfiber cloth to press the film from the center outward, ensuring full contact with the paint. Trim any excess if necessary and allow the adhesive to set according to ambient temperature recommendations.

Usage recommendations

For best results, apply the film in a dust-free environment at moderate temperatures (typically 15–25°C). Avoid high-pressure car washes for 24–48 hours after installation to allow the adhesive to cure. If removal or repositioning is required, warm the film gently with a heat gun or hair dryer and peel slowly at a low angle to minimize adhesive residue.