Protective sill film GrizzGlass BodyShield for Volkswagen Tiguan Estate 5D (2007–2011) set 4-in-1

GrizzGlass BodyShield protective sill film is designed specifically for the Volkswagen Tiguan Estate 5-door models produced between 2007 and 2011. This pre-cut 4-in-1 set covers the door sills to protect the original paintwork from scratches, scuffs and everyday wear caused by getting in and out of the vehicle. The transparent, low-profile film conforms to sill contours for a near-invisible finish that preserves the factory appearance while extending the life of vulnerable areas.

Advantages

The film provides a discreet and durable protective layer that prevents abrasion and minor impacts without altering the visual appearance of the sill. Its pre-cut shape ensures accurate alignment to the Tiguan Estate sill geometry, reducing trimming and adjustment during installation. The material resists yellowing and maintains clarity, is easy to clean, and can be removed without damaging the underlying paint when replacement is required.

Suitable for

• Protecting door sills from shoe scuffs and luggage contact
• Maintaining original paintwork on a Volkswagen Tiguan Estate 5‑door (2007–2011)
• DIY vehicle protection projects with pre-cut films
• Used car preparation to preserve resale condition

Key specifications

• Pre-cut 4-in-1 set covering all door sills of the 5-door model
• Transparent protective film with low visual profile
• Tailored shape for Volkswagen Tiguan Estate 2007–2011 sill contours
• Durable, abrasion-resistant material resistant to yellowing
• Removable without leaving adhesive residue when removed correctly

How to use

Clean the sill area thoroughly with a suitable degreasing cleaner and allow it to dry completely. Position the pre-cut film on the sill to check fit, then peel back a portion of the liner and apply the adhesive side to the sill while smoothing out air bubbles with a squeegee or soft cloth. Work gradually along the length of the sill, removing the liner as you press the film into place. After full application, press edges firmly and allow the adhesive to set according to ambient temperature instructions.

Usage recommendations

For best results, apply the film at moderate ambient temperatures (15–25°C) on a dust-free surface. Avoid high-pressure washes immediately after installation and allow at least 24 hours for the adhesive to cure before heavy use. If removal is needed, warm the film slightly with a heat gun or hairdryer and peel slowly at a low angle to reduce risk of residue or paint lifting.