Protective Door Sill Film GrizzGlass BodyShield for Volvo XC70 III (2013–2016) 4-piece set

GrizzGlass BodyShield protective door sill film for Volvo XC70 III (2013–2016) is a transparent, pre-cut 4-piece set designed to protect the vehicle's entry thresholds from scratches, scuffs and wear caused by shoes, luggage and everyday loading. Each piece is shaped to match the sill contours of the specified model and is intended for interior application to preserve the original finish while remaining visually unobtrusive.

Advantages

The film is virtually invisible once applied, providing durable surface protection without altering the appearance of the sill. It resists abrasion and daily mechanical impact while allowing easy cleaning and maintenance of the protected area. Because the set is pre-cut to the vehicle's contours, it reduces trimming time and improves installation accuracy. The adhesive is formulated for interior use and is designed to bond securely while allowing for careful removal without leaving significant residue when removed correctly.

Suitable for

• Protecting entry thresholds on Volvo XC70 III (2013–2016) against shoe scuffs and luggage scratches
• Maintaining original sill finish in daily-use vehicles
• Preserving resale value by avoiding visible wear at entry points
• Use during frequent loading and unloading, including active family or work vehicles

Key specifications

• Material: transparent protective film with pressure-sensitive adhesive
• Set composition: 4 pre-cut pieces shaped for entry thresholds
• Application area: interior door sill/entry threshold
• Finish: clear/transparent to preserve original appearance
• Primary protection: abrasion, scratches and scuffs from footwear and cargo

How to use

Clean the sill area thoroughly with a mild, non-greasy cleaner and allow it to dry completely. Position the pre-cut film pieces on the sill to verify fit before removing the backing. Peel the backing incrementally while aligning the film to the sill contour and apply using a soft squeegee or cloth to smooth out air bubbles and ensure full contact. Apply firm, even pressure across the entire surface and pay attention to edges to prevent lifting. Allow the adhesive to set according to ambient temperature recommendations before heavy use.

Usage recommendations

For best results, apply the film at room temperature on a clean, dry surface and avoid immediate heavy loading of the sill for 24 hours. If removal is required, warm the adhesive area gently with a hair dryer and peel slowly at a low angle to reduce the risk of adhesive residue; remove any remaining residue with an appropriate interior-safe cleaner.