Protective door handle film GrizzGlass BodyShield for Audi A4 B6 Sedan (2000–2006) set 4 pieces

GrizzGlass BodyShield protective door handle film for Audi A4 B6 Sedan (2000–2006) is a set of four pre-cut clear films designed to protect the painted area surrounding exterior door handles. Each piece follows the typical contour of the handle recess on this model, providing a thin, transparent barrier that helps prevent scratches, paint chipping and wear caused by fingernails, keys, rings and repeated contact. The film is formulated to adhere reliably to painted automotive surfaces while remaining discreet and preserving the original finish.

Advantages

This protective film is virtually invisible after installation and does not alter the tactile feel of the door handle area. It is pre-cut for the Audi A4 B6 Sedan, which reduces trimming and simplifies alignment. The material is resistant to everyday abrasion and helps maintain the vehicle’s appearance by reducing localized paint damage. Removal is possible without significant residue when carried out according to instructions.

Suitable for

• Audi A4 B6 Sedan model years 2000–2006
• Owners who want to protect paint around exterior door handles from scratches and chips
• Vehicles with factory paint or professionally repainted door handle areas
• Applications where a discreet, transparent protection layer is required

Key specifications

• Set contents: 4 pre-cut adhesive protective film pieces sized for door handle recesses
• Material: transparent protective polymer film with pressure-sensitive adhesive
• Surface finish: clear, low-gloss to preserve original paint appearance
• Thickness: thin film designed for minimal edge visibility and flexibility
• Compatibility: formulated for application on painted automotive surfaces
• Durability: resistant to everyday abrasion and light impacts from keys and rings

How to use

Clean the door handle area thoroughly with isopropyl alcohol or a gentle automotive cleaner and allow it to dry completely. Peel the protective film from its backing and position it over the handle recess, aligning the pre-cut shape with the panel contours. Apply firm, even pressure from the center outward to remove air pockets and ensure adhesion. If necessary, use a squeegee or soft cloth to smooth the film and trim any excess with a sharp blade. Allow the adhesive to set for several hours before exposing the area to water or heavy use.

Usage recommendations

Apply at moderate ambient temperatures (ideally 15–25 °C) for best adhesion. Avoid application on freshly painted surfaces until the paint has fully cured according to the paint manufacturer’s guidelines. For removal, warm the film slightly with a hair dryer and peel slowly at a low angle to minimize adhesive residue; any remaining residue can be removed with an appropriate adhesive remover safe for automotive paint.