Paint protection film GrizzGlass BodyShield for Audi A6 C7 Sedan (2011–2014) — set for wheel arches (2-in-1)

GrizzGlass BodyShield paint protection film for the Audi A6 C7 Sedan (2011–2014) is a transparent, aftermarket protective layer designed to cover wheel arches and adjacent body panels. The kit is supplied as a 2-in-1 set sized and shaped to match the contours of the Audi A6 C7 wheel arch area, helping to preserve factory paint by reducing the impact of stones, chips and abrasion during everyday driving.

Advantages

The film is thin and optically clear, maintaining the original appearance and gloss of the vehicle while providing a sacrificial layer against mechanical damage. Its conformable material follows curved surfaces for a near-invisible fit and is engineered for outdoor durability and resistance to common contaminants. Supplied as a matched 2-in-1 set, the pieces simplify coverage of both wheel arch lips and adjacent panels to reduce installation time and ensure consistent protection.

Suitable for

• Audi A6 C7 Sedan models from 2011 to 2014 requiring wheel arch and adjacent panel protection
• Owners who want to reduce paint chips and stone damage without altering exterior appearance
• Aftermarket installation where targeted protection of high-impact zones is preferred over full-vehicle coverage
• Professional fitters and experienced DIYers familiar with liquid-slip installation techniques for paint protection film

Key specifications

• Compatibility: designed for Audi A6 C7 Sedan wheel arches and adjacent body panels (2011–2014)
• Kit configuration: 2-in-1 set sized for wheel arch areas and adjacent panels
• Material properties: thin, optically clear protective film with conformable elasticity
• Surface finish: transparent, gloss-retaining top surface
• Durability: engineered for outdoor resistance to stone impacts, abrasion and common road contaminants
• Application type: aftermarket adhesive film suitable for wet-installation methods

How to use

Clean the target surfaces thoroughly to remove dirt, wax and oils before application. Position each film piece to confirm fit, then apply using a standard wet-installation solution and a squeegee to remove air and excess fluid. Work from the center outward to achieve full contact and conform the film into curves and recesses. Trim any excess material if necessary and allow adhesive to set according to ambient temperature and humidity; follow curing times before exposing the vehicle to heavy washing or prolonged wet conditions.

Usage recommendations

For best results, have the kit installed by a professional or by an installer experienced with paint protection film. Avoid automatic high-pressure car washes for the first 48–72 hours after installation and inspect edges periodically for lifting. Use pH-neutral automotive cleaners and a soft microfiber cloth when cleaning protected areas to maintain clarity and adhesion.