Protective headlight film GrizzGlass BodyShield for Volkswagen Passat B6 Sedan (2005–2010) set 2-in-1

GrizzGlass BodyShield for Volkswagen Passat B6 Sedan (2005–2010) is a 2-in-1 protective headlight film cut to fit the lens shape. The transparent, self-adhesive film provides a physical barrier against stone chips, scratches and abrasion while allowing original light output and optical clarity to remain largely unchanged. Designed for exterior protection, the film also offers resistance to UV exposure and everyday wear to help extend the service life of factory headlight lenses.

Advantages

The film is pre-cut for the Volkswagen Passat B6 Sedan (2005–2010) to ensure accurate coverage and fit, reducing trimming time during installation. Its clear, low-profile finish preserves headlight appearance and beam pattern. The self-adhesive backing enables secure adhesion without additional adhesives, and the material is formulated to resist yellowing from UV and environmental factors. The 2-in-1 set provides full coverage for both headlights in one package, suitable for professional workshops or do-it-yourself application.

Suitable for

• Protecting front headlight lenses from stone chips and road debris
• Preventing scratches and surface abrasion during regular vehicle use
• Reducing UV-induced yellowing and maintaining lens transparency
• DIY or professional exterior protection and restoration projects

Key specifications

• Compatibility: Volkswagen Passat B6 Sedan model years 2005–2010
• Set contents: 2-in-1 pre-cut film for both headlights
• Finish: Transparent, low-profile protective layer
• Adhesive: Pressure-sensitive self-adhesive backing for direct application
• Protection: Resistant to stone chips, scratches, UV exposure and light wear
• Application type: Exterior headlight lens protection

How to use

Ensure the headlight lenses are thoroughly cleaned and free of wax, polish residues and dirt before application. Position the pre-cut film on the lens to check fit, then peel back a portion of the release liner and align the film carefully. Smooth the film from the center outward to eliminate air pockets and ensure full contact with the lens surface. Use a squeegee or soft applicator to press edges and curves. Trim any excess material if necessary and allow the adhesive to set according to ambient temperature recommendations.

Usage recommendations

For best results, apply the film in a clean, dust-free environment at moderate temperatures. Avoid washing the vehicle or exposing the film to heavy water spray for 24–48 hours after installation to allow full adhesive bonding. Periodic cleaning with mild soap and water will maintain clarity; avoid abrasive cleaners or strong solvents.