Protective carbon-look pillar film GrizzGlass BodyShield for Renault Austral (2022–2025) set 8-in-1

GrizzGlass BodyShield protective carbon-look pillar film for Renault Austral (2022–2025) is a pre-cut exterior film set designed to cover A- and B-pillars. The 8-in-1 kit provides adhesive panels that adhere to pillar surfaces to protect paintwork from scratches, chips and everyday wear while adding a textured carbon-finish look. The thin, conformable material follows pillar contours to preserve the vehicle’s appearance with minimal visual impact and reduces the need for frequent touch-ups.

Advantages

The film combines impact and abrasion resistance with a carbon-style surface that resists fading and staining. Pre-cut pieces ensure accurate fit to the Renault Austral pillar shapes, simplifying installation and reducing trimming. The adhesive backing is formulated for outdoor use and offers good adhesion to automotive paint while allowing long-term removal without excessive residue when removed correctly. Lightweight and thin, the film does not interfere with pillar-mounted components or trim alignment.

Suitable for

• Protection of A- and B-pillars on Renault Austral (2022–2025)
• Preventing chips and scratches from keys, bags and loading activities
• Maintaining painted surfaces and reducing repaint frequency
• Adding a carbon-look finish for a uniform exterior appearance

Key specifications

• Set configuration: 8 pre-cut adhesive panels for A- and B-pillars
• Surface finish: carbon-look texture
• Application area: exterior pillar surfaces (A-pillar and B-pillar)
• Material properties: thin, conformable protective film with UV resistance and abrasion resistance
• Adhesive: pressure-sensitive outdoor-grade adhesive designed for automotive paint

How to use

Clean the pillar surfaces thoroughly with an appropriate automotive surface cleaner and ensure they are dry and free of wax, silicone or heavy contaminants. Test-fit each pre-cut panel to confirm alignment before removing the adhesive liner. Remove the liner progressively while applying the film from one edge, smoothing with a soft squeegee or microfiber to eliminate air pockets and ensure full adhesion. For curved or recessed sections, warm the film gently with a heat gun at low temperature to increase conformability, taking care not to overheat the paint. Trim any excess if necessary using a sharp blade and finish edges by pressing firmly for consistent adhesion.

Usage recommendations

Apply at moderate ambient temperatures (ideally between 15–25°C) on a dust-free day. Allow adhesive cure time as recommended by professional installers before washing the vehicle and avoid high-pressure water jets directed at panel edges for at least 48 hours after installation.