Carbon-look pillar film GrizzGlass BodyShield for Audi A6 C7 Sedan (2011–2014) set 6-in-1

GrizzGlass BodyShield carbon-look pillar film set for Audi A6 C7 Sedan (2011–2014) is a pre-cut exterior trim kit designed to cover and protect the A-, B- and C-pillars of the vehicle. The kit includes six adhesive film pieces shaped to match factory pillar profiles, delivering a carbon-style finish that conceals minor surface imperfections and resists light scratches and wear. Materials and fit are intended for adhesive bonding to factory trim surfaces on the sedan body.

Advantages

The carbon-look film provides a uniform, textured appearance that complements dark and metallic paint finishes while reducing visible wear on pillar trim. Pre-cut pieces simplify alignment and reduce trimming during installation. The adhesive backing is formulated for exterior use, offering stable adhesion and water resistance when applied to clean, non-porous trim. The thin film preserves door and window sealing tolerances and is removable if needed without major modification of the original trim.

Suitable for

• Audi A6 C7 Sedan models from 2011 to 2014
• Owners who want a carbon-style look on factory pillar trim
• Repairing or hiding minor surface scratches and scuffs on pillars
• Exterior trim upgrade without painting or replacement

Key specifications

• Set composition: six pre-cut adhesive films for A-, B- and C-pillars
• Finish: carbon-look textured surface
• Application area: exterior pillar trim on sedan body
• Attachment method: pressure-sensitive adhesive backing for direct bonding
• Material properties: thin flexible film designed to conform to curved profiles and resist light abrasion

How to use

Prepare the vehicle by cleaning the pillar surfaces thoroughly with an appropriate solvent or cleaner to remove dirt, wax and silicone residues. Dry surfaces completely and verify temperature conditions recommended for adhesive application. Peel the backing from each pre-cut film and align it carefully with the pillar profile, starting from one edge and applying pressure progressively to avoid air pockets. Use a soft squeegee or cloth to press the film firmly and smooth out bubbles. Allow the adhesive to cure per ambient temperature guidelines before exposing the vehicle to heavy washing or high-pressure water.

Usage recommendations

For best results, install the film at moderate ambient temperatures (above 10°C / 50°F) on a clean, dry surface. Avoid installation in direct sunlight or on surfaces that are icy or overheated. If removal is required, heat the film gently with a heat gun or hot air blower to soften the adhesive and peel slowly to minimize residue; any remaining adhesive can be cleaned with a suitable adhesive remover that is safe for exterior trim.