Protective Interior Film GrizzGlass PianoSkin Matte for Tesla Model 3 (2017–2020) 4-in-1

GrizzGlass PianoSkin Matte for Tesla Model 3 (2017–2020) is a tailored protective interior film supplied as a 4-in-1 kit. The film covers dashboard and trim surfaces with a non-gloss, low-reflective matte finish that reduces glare and visible fingerprints while providing a protective barrier against light scratches, scuffs and everyday wear. Designed to follow factory contours, the film preserves the original appearance and texture of interior surfaces and enables easier cleaning and maintenance.

Advantages

The matte film minimizes reflections and fingerprints, improving visibility and maintaining a clean look without changing the underlying surface design. As a thin, conformable protective layer, it prevents abrasion and superficial damage from routine use and small objects. The kit format with pre-cut pieces simplifies installation and helps achieve accurate alignment with factory trim lines. The material is removable without leaving significant residue when removed according to instructions.

Suitable for

• Protecting dashboard surfaces in Tesla Model 3 (2017–2020)
• Reducing glare and visible fingerprints on trim and consoles
• Preventing light scratches and wear in daily-driven vehicles
• Owners who prefer a matte, low-reflective interior finish

Key specifications

• Finish: matte, low-reflective surface
• Kit composition: 4 pre-cut film pieces tailored for Model 3 interior contours
• Primary function: cosmetic protection against scratches, scuffs and fingerprints
• Material properties: thin, conformable protective film with removable adhesive
• Compatibility: designed specifically for Tesla Model 3 model years 2017–2020

How to use

Clean the target interior surfaces thoroughly with a lint-free cloth and a mild, non-abrasive cleaner to remove dust, oils and residues. Position each pre-cut film piece on the intended area and align it with factory edges and seams. Use a squeegee or similar flat tool to smooth the film from the center outward, removing air bubbles and ensuring full adhesion. Trim any excess if necessary and allow the adhesive to set for the time recommended by the manufacturer before heavy use.

Usage recommendations

Apply at room temperature on a clean, dry surface for best adhesion. Avoid stretching the film excessively during installation to prevent distortion. For removal, warm the film slightly with a hair dryer to soften the adhesive and peel slowly at a low angle to reduce residue; any remaining adhesive can be cleaned with an approved adhesive remover that is safe for interior plastics.