Protective interior film GrizzGlass PianoSkin Matte for Volvo XC90 B5 Drive Mode (2019) 2-in-1

GrizzGlass PianoSkin Matte for Volvo XC90 B5 Drive Mode (2019) is a pre-cut interior protective film supplied as a 2-in-1 kit designed to match the contours of the drive mode control area. The matte surface reduces glare and reflections while shielding factory trim from scratches, fingerprints and everyday wear. The film follows the original design lines to preserve the vehicle’s appearance and provides a discreet, low-reflective finish that keeps controls readable under varied lighting conditions.

Advantages

The film offers a matte anti-glare finish that minimizes reflections and improves visibility of drive mode controls. It protects against minor abrasions, oils and fingerprints without altering the tactile feel of buttons or surrounding trim. Delivered as a 2-in-1 kit, the set includes pieces sized to cover the primary control zones for the Volvo XC90 B5 Drive Mode (2019), enabling a tailored fit that maintains factory aesthetics. The material is thin and optically clear in form while providing durable surface protection and long-term adhesion when applied according to instructions.

Suitable for

• Protecting the drive mode control area of Volvo XC90 B5 (2019) interiors
• Reducing glare and reflections on glossy trim around controls
• Preventing scratches and fingerprint marks from frequent use
• Maintaining factory look while adding discreet surface protection

Key specifications

• Finish: matte, anti-glare
• Format: 2-in-1 pre-cut kit for specific control area
• Material properties: thin protective film with durable surface layer
• Function: scratch, fingerprint and wear protection for interior trim
• Installation: adhesive-backed film designed for clean, dry surfaces

How to use

Prepare the surface by cleaning the drive mode control area thoroughly with a lint-free cloth and an appropriate alcohol-based cleaner to remove grease and dust. Position the pre-cut pieces to confirm fit before peeling the backing. Align the film precisely with the control edges and apply from one side, smoothing out air bubbles with a soft squeegee or card. If necessary, lift and reposition carefully while adhesive is still fresh. After application, press along the edges to ensure full adhesion and avoid contact with water or heavy use for 24 hours to allow the adhesive to set.

Usage recommendations

For best results, perform installation in a dust-free, well-lit environment at moderate room temperature. Use a microfiber cloth and a low-angle squeegee to reduce the risk of scratches during application. Avoid aggressive solvents or abrasive cleaners on the film; clean with mild soap and water or a specialist interior cleaner suitable for protective films.