Glass pillar film GrizzGlass BodyShield Carbon for Jetour Dashing (2025–2026) set 10-in-1

Glass pillar film GrizzGlass BodyShield Carbon for Jetour Dashing (2025–2026) set 10-in-1 is a pre-cut protective overlay developed to cover B- and C-pillars on matching Jetour Dashing vehicles. The film reproduces a carbon-style finish while providing a thin transparent layer that protects painted pillars and surrounding trim from scratches, abrasion and routine wear. The design follows the contours of the specified model to preserve original fit and sight lines, and the set contains multiple pieces to cover both sides and several pillar sections.

Advantages

The GrizzGlass BodyShield Carbon film combines impact- and scratch-resistant material with a textured carbon appearance to protect visible pillar areas without altering vehicle geometry. Its pre-cut shape reduces trimming and alignment time compared with universal films, and the thin, conformable material maintains close adhesion to curved surfaces. The film is abrasion-resistant, resists micro-scratches from seat belts and cargo, and is formulated for long-term outdoor use while maintaining the original look of paint and trim.

Suitable for

• Protection of B-pillars and C-pillars on Jetour Dashing 2025–2026
• Prevention of scratches from loading, unloading and daily door contact
• DIY or professional application for appearance preservation
• Replacement of worn or scratched pillar trim without repainting

Key specifications

• Set composition: 10 pre-cut pieces shaped for front and rear pillar sections
• Finish: carbon-style textured surface
• Material properties: thin, conformable protective film with scratch and abrasion resistance
• Adhesive type: pressure-sensitive adhesive designed for painted surfaces (removable without damaging paint when removed correctly)
• Compatibility: designed for Jetour Dashing body geometry for model years 2025–2026
• Coverage: both left and right B- and C-pillar areas included

How to use

Before application, clean the pillar surfaces thoroughly to remove dirt, wax and grease; use an appropriate cleaner and allow the surface to dry fully. Position each pre-cut piece to verify fit, then peel back a portion of the liner and apply the film from one edge while smoothing out air bubbles with a soft squeegee or flat tool. Work gradually across curved areas to maintain adhesion and avoid trapping moisture. Trim any excess material only if necessary and re-check alignment. Allow adhesive to set according to ambient temperature recommendations before washing the vehicle.

Usage recommendations

For best results use at moderate temperatures (avoid installing below 10°C / 50°F) and apply in a clean, dust-free environment. If uncertain about DIY installation on curved pillars, consider professional fitment to ensure consistent adhesion and finish. When removing the film, warm the area with a heat gun or hairdryer to soften adhesive and peel slowly to reduce the risk of residue; any remaining adhesive can be removed with a suitable residue remover compatible with automotive paint.