GrizzGlass BodyShield Black protective pillar film for Bestune T77 (2025–2026) set 10-in-1

GrizzGlass BodyShield Black protective pillar film for Bestune T77 (2025–2026) is a pre-cut 10-in-1 set of adhesive films designed to cover A, B and C pillars on the specified vehicle models. The matte black finish integrates with exterior trim while providing a protective barrier against scratches, stone chips and surface abrasion. The films are shaped to fit the contours of the pillars for a near-invisible installed appearance and are suitable for both DIY installation and professional fitting to help preserve paintwork and exterior condition.

Advantages

The set includes ten precisely cut pieces tailored for pillar locations, offering comprehensive coverage without the need for trimming. High-adhesion backing ensures secure attachment to metal and painted surfaces while remaining removable with appropriate heat and solvent techniques. The film’s surface resists minor impacts and abrasions, reducing the risk of paint damage from daily use and road debris. Its black finish keeps the vehicle’s look consistent with dark trims and reduces visible scuffs.

Suitable for

• Protecting A, B and C pillars of Bestune T77 (model years 2025–2026)
• Preventing scratches from seat belts, loading, and passenger entry/exit
• Shielding paintwork from stone chips and road debris
• DIY application at home or installation by professional wrap/film fitters
• Maintaining exterior appearance and resale value

Key specifications

• Set composition: 10 pre-cut pillar film pieces sized for vehicle pillars
• Finish: matte black
• Material type: protective adhesive film with high-tack backing
• Surface protection: resists minor scratches, stone chips and abrasion
• Application type: adhesive with conformable film for curved surfaces
• Removability: removable with controlled heat and solvent methods without damaging paint when removed correctly

How to use

Clean the pillar surfaces thoroughly to remove dirt, wax and oils before applying the film. Measure and align each pre-cut piece to the corresponding pillar section, then peel the backing and apply from one edge, smoothing out air pockets with a soft squeegee. Use gentle heat to conform the film around tight curves and ensure full adhesion. Trim any excess if necessary, and allow the adhesive to cure per ambient temperature recommendations before exposing the vehicle to heavy washing or extreme weather.

Usage recommendations

For best results, perform installation in a dust-free, shaded area at moderate temperatures. If unsure about DIY fitting, consider professional installation to achieve optimal alignment and to avoid trapping contaminants. Regularly inspect the film and clean with mild soap and water; avoid abrasive cleaners and high-pressure jets directly at the film edges.