Protective pillar film GrizzGlass BodyShield for Chery Tiggo 8 2025–2026 2-in-1 set

GrizzGlass BodyShield pillar protective film for Chery Tiggo 8 2025–2026 is a pre-cut 2-in-1 set designed to protect the vehicle's vertical trim areas. The nearly transparent polymer layer adheres to factory-finish pillars to shield them from scratches, stone chips and abrasion while maintaining original appearance. The kit is sized and shaped for the specified model years to ensure coverage of commonly exposed pillar surfaces without altering fit or function.

Advantages

The protective film provides a thin, impact-resistant barrier that reduces cosmetic damage from keys, seatbelt buckles and road debris while remaining visually discreet. Its adhesive backing is engineered for automotive exterior use, offering reliable adhesion to painted and plastic pillars with minimal residue on removal. The material maintains clarity and resists yellowing, ensuring long-term preservation of the trim's appearance under daily urban and highway conditions.

Suitable for

• Protecting A-, B- and C-pillars from scratches and chips
• Preserving factory trim finish on Chery Tiggo 8 (2025–2026)
• Daily urban driving and long-distance highway use
• Owners planning to resell or maintain vehicle appearance

Key specifications

• Set composition: 2 pre-cut pillar films tailored to vehicle pillars
• Material: high-clarity protective polymer with UV-stable properties
• Thickness: thin protective film optimized for impact resistance and conformity
• Finish: virtually transparent to preserve original trim color and gloss
• Adhesive: automotive-grade pressure-sensitive adhesive formulated for exterior surfaces
• Compatibility: designed specifically for Chery Tiggo 8 model years 2025–2026

How to use

Clean the pillar surfaces thoroughly with a non-greasy cleaner and ensure they are dry and free of dust, wax and silicone residues. Test-fit the pre-cut film, then peel back the liner gradually while smoothing the film into place using a soft squeegee or a microfiber cloth to avoid air pockets. Apply firm, even pressure across the film to activate the adhesive and conform it to curves and edges. If needed, use a heat gun on low setting to improve conformability on tight contours, taking care not to overheat painted surfaces. Allow the adhesive to set before exposing the area to water or heavy abrasion.

Usage recommendations

For best results, apply the film at room temperature on a calm day and avoid installation in direct sunlight. Regularly inspect the film for edge lifting and clean with mild automotive detergents; avoid solvent-based cleaners and abrasive pads. When removal is required, warm the film with a heat gun or hair dryer to soften the adhesive and peel slowly at a low angle to minimize residue.