GTV microwave motion sensor CM-5 AE-CM5000-00 1200W 220–240V AC 50/60Hz 360°

GTV CM-5 AE-CM5000-00 is a microwave motion sensor designed for electrical lighting control in indoor environments. Operating on 220–240V AC at 50/60Hz, the device monitors movement across a full 360° coverage and switches connected lighting circuits or loads up to 1200W. The sensor uses microwave detection to identify presence and motion reliably even in low-light conditions or when objects pass behind partial obstructions, making it suitable for automated control of interior lighting and energy-saving installations.

Advantages

The microwave detection technology provides stable motion sensing with good sensitivity and penetration through non-metallic materials, enabling consistent activation of lights and automated circuits. With 360° coverage and compatibility with standard mains voltage, the sensor integrates into existing electrical systems without special low-voltage wiring. The unit supports loads up to 1200W, allowing direct control of a wide range of lighting types, and its omnidirectional detection reduces the need for multiple sensors in open indoor areas.

Suitable for

• Corridors and hallways in residential or commercial buildings
• Storage rooms, utility rooms and basements
• Staircases and entrance areas requiring automatic lighting
• Open-plan offices and conference zones where central detection is needed
• Technical rooms and service spaces with standard mains supply

Key specifications

• Supply voltage: 220–240V AC, 50/60Hz
• Maximum switched load: 1200W
• Detection angle: 360° omnidirectional coverage
• Detection method: microwave motion sensing
• Installation environment: indoor use

How to use

Install the motion sensor according to local electrical codes and the manufacturer's wiring diagram, connecting it to the 220–240V AC mains and the controlled lighting circuit. Position the sensor centrally in the area to be covered to ensure the 360° detection works effectively and avoid placing it directly behind large metal objects that can interfere with microwave signals. Configure any available sensitivity or time-delay settings if provided by the installation instructions, and test the sensor by walking through the detection area to confirm reliable switching of the connected lighting.

Usage recommendations

For consistent performance, mount the sensor at a height and location that maximizes unobstructed coverage. Avoid close proximity to heavy machinery or large metallic surfaces that may affect microwave detection. Use the device where stable mains voltage is available and ensure the connected load does not exceed 1200W. Periodically verify operation and clean the sensor housing of dust to maintain detection accuracy.