Electrical enclosure accessory Hager BA7A100060 — PVC grey profile, 6.5 mm x 2000 mm, EN50085-2-3 certified

Hager BA7A100060 is a grey PVC profile designed for finishing and protecting cable ducts and trunking in electrical installations. With a width of 6.5 mm and a length of 2000 mm, this extrusion provides a slim, consistent edge for distribution boards, conduits and cable management systems. The profile is manufactured to meet EN50085-2-3 requirements and is intended for neat, durable installations in residential and commercial environments.

Advantages

The PVC profile offers a uniform finish, mechanical protection for cable edges and resistance to typical indoor environmental conditions. Its slim 6.5 mm cross-section allows discreet integration into existing trunking and enclosures while the 2000 mm length reduces the number of joints required for longer runs. Compliance with EN50085-2-3 ensures suitability for use with standardized cable management systems.

Suitable for

• Finishing and protecting edges of cable ducts and trunking
• Use inside distribution boards and enclosures
• Residential electrical installations
• Commercial cable management systems

Key specifications

• Material: PVC (polyvinyl chloride)
• Color: grey
• Width (cross-section): 6.5 mm
• Length: 2000 mm
• Certification: EN50085-2-3 compliant

How to use

Measure and cut the PVC profile to the required length using an appropriate saw for plastic. Insert or press the profile into the open edge of the trunking or cable duct to provide a finished edge and added mechanical protection. Ensure ends and joints are aligned and, where necessary, secure with appropriate clips or non-corrosive fasteners compatible with PVC and the enclosure material. Follow standard electrical installation safety practices and disconnect power where required during fitting.

Usage recommendations

Store the profile flat and protected from direct sunlight and extreme temperatures prior to installation. For indoor use, avoid exposure to strong solvents or abrasive cleaners that can degrade PVC. When joining multiple lengths, ensure tight alignment and consider using compatible coupling or sealant if a moisture- or dust-resistant finish is required.