Signage Display Mount Hagor 3311 Black 165.1 cm 250 kg

The Hagor 3311 signage display mount in black is a wall mounting system designed for multi-screen installations of five portrait-oriented displays, each between 46 and 65 inches (117–165 cm). The system supports per-screen VESA patterns up to 400 x 600 mm and a tilt range from 0 to 20°. The total width of the assembled system is 3709 mm and can be shortened if necessary. Cable routing is handled with cable clips on the rails, and visible surfaces are protected by an impact- and scratch-resistant powder coating. Each screen may carry up to 50 kg, with the overall system rated to support heavy commercial displays in public and corporate environments.

Advantages

The Hagor 3311 offers a robust solution for multi-screen signage with a high per-screen weight allowance and compatibility with a wide range of VESA patterns, enabling the installation of large, commercial displays. The tilt adjustment up to 20° allows precise viewing-angle optimization for portrait orientation, while cable clips on the rails keep wiring tidy and accessible. The powder-coated black finish improves durability and reduces visible wear in high-traffic areas, and the modular design is compatible with the comPROnents® series for future expansion or customization.

Suitable for

• Video walls and digital signage in retail and shopping centers
• Information displays in transportation hubs and public spaces
• Corporate lobby and reception area presentations
• Control rooms and monitoring stations requiring portrait screens
• Hospitality and exhibition stand installations

Key specifications

• Screen size compatibility: 46–65 inches (117–165 cm) per display
• Number of displays supported: 5 (mounted side-by-side in portrait)
• Maximum VESA compatibility: up to 400 x 600 mm
• Tilt range: 0° to 20°
• Total system width (assembled): 3709 mm (can be shortened)
• Per-screen maximum load: 50 kg
• Finish: impact- and scratch-resistant black powder coating
• Cable management: cable clips on rails for routed cabling

How to use

Mount the Hagor 3311 system to a suitably rated wall structure following local building codes and the manufacturer’s installation instructions. Install the rails at the correct spacing to accommodate five portrait-oriented screens, adjust the overall width as required, and secure each display using VESA mounting points up to 400 x 600 mm. Set the tilt angle between 0° and 20° for optimal viewing, route display cables along the rails using the supplied cable clips, and verify that each screen does not exceed the 50 kg per-screen limit. After installation, inspect all fasteners and alignment before powering the displays.

Usage recommendations

Ensure the mounting surface and fixings are rated to support the combined live load of all screens plus the mounting hardware. For heavy or high-impact public installations, use appropriate anchors and, where possible, consult a professional installer. Regularly inspect mounting points and cable management clips for wear, and avoid exceeding the per-screen weight limit or specified VESA dimensions.