Monitor Mount Hagor 3325 165.1 cm 80 kg Black

The Hagor 3325 monitor mount is a dual mobile stand designed for two flat screens between 55 and 65 inches (140–165 cm) mounted side-by-side. Constructed for professional and public environments, the stand supports up to 80 kg total load (maximum 40 kg per screen), accepts VESA patterns up to 800 x 400 mm and provides tilt adjustment to improve viewing angles. The system runs on lockable castors for secure, flexible relocation and features height-adjustable aluminium pillars and rails with cable management along the rear to keep cables concealed. Durable powder-coated surfaces offer impact and scratch resistance, and rails and pillars can be shortened if required for specific room layouts.

Advantages

The mobile dual stand combines high load capacity with compatibility for large displays, permitting secure mounting of two 55–65" screens while keeping a compact footprint. Adjustable tilt and height settings allow ergonomic alignment of both displays, and the integrated cable clips deliver tidy cable routing. Locking castors support easy repositioning and stable placement without permanent installation. The powder-coated finish increases durability in frequent-use environments.

Suitable for

• Digital signage in retail, reception areas and showrooms
• Meeting rooms and presentation spaces where two displays are used side-by-side
• Temporary or shared workspaces requiring mobile display solutions
• Events, conferences and trade shows with short-term installation needs

Key specifications

• Supported screen size: 55–65 inches (140–165 cm)
• Maximum total weight capacity: 80 kg (40 kg per screen)
• VESA compatibility: up to 800 x 400 mm
• Tilt adjustment range: -5° to +15° (per included product notes) and 0°–20° spec for monitor mount
• Number of displays supported: 2 (side-by-side configuration)
• Height-adjustable aluminium pillars and rails; rails/pillars can be shortened
• Mobility: castors with locking brakes for secure positioning
• Cable management: rear cable routing with clips
• Finish: impact- and scratch-resistant powder coating, black colour

How to use

Place the mobile stand on a level surface and lock the castors before fixing displays. Mount each screen to the VESA brackets, ensuring the weight per screen does not exceed 40 kg and that the VESA pattern is within 800 x 400 mm. Adjust rail height along the aluminium pillars to align the displays vertically, and set the tilt of each mount to the desired angle for optimal viewing. Route power and signal cables along the rear of the rails and secure them with the supplied cable clips to keep them out of sight. If necessary, shorten rails or pillars according to the room layout following the manufacturer's guidance, and test stability after adjustments.

Usage recommendations

To maintain safe operation and longevity, verify combined weight and distribution before installation, always lock the castors when the stand is in use, and avoid sudden lateral forces on mounted screens. Use the cable clips to prevent strain on connectors and perform routine checks of fastenings and brakes especially in high-traffic or public installations.