Outdoor vandal bullet network camera Hanwha Vision Q series QNO-7082R, 4MP 30fps, 3.2–10.0mm motorized lens, IR

The Hanwha Vision QNO-7082R is a bullet-style IP security camera engineered for outdoor ceiling or wall installation. It records 4MP video at up to 30 fps using a 1/3" CMOS sensor and a motorized 3.2–10 mm (3.1×) varifocal lens, providing wide coverage and flexible framing. The camera supports day & night operation with IR illumination, wide dynamic range processing and multiple video codecs for efficient streaming and storage. Rugged IP66 and IK10 ratings and a grey finish suit exposed perimeter, parking and entrance surveillance in a wired Ethernet setup.

Advantages

The QNO-7082R combines high-resolution imaging with a motorized varifocal lens to allow on-site or remote adjustment of field of view without swapping optics. Its low-light sensitivity and built-in IR provide continuous monitoring in varying lighting conditions, while WDR improves visibility in scenes with strong contrast. Multiple codec support including H.265 reduces bandwidth and storage usage. Robust IP66 and IK10 protection ensures reliable outdoor operation under harsh weather and impact conditions.

Suitable for

• Perimeter and fence line monitoring
• Parking lots and vehicle access control
• Building entrances and façades
• Outdoor corridors and service areas
• Retail exteriors and small campus surveillance

Key specifications

• Image sensor: 1/3" CMOS, 4 MP (2560 × 1440)
• Frame rate: Up to 30 fps at full resolution
• Lens: Motorized varifocal 3.2–10 mm (3.1× optical zoom)
• Field of view: Horizontal 98.6°, Vertical 52.3°, Diagonal 115.7° (at wide)
• Minimum illumination: Color 0.1 Lux (F1.6, 1/30s); B/W 0 Lux with IR on
• Night vision: IR illumination with viewable range up to 30 m
• Image enhancement: Day & Night (ICR), 120 dB WDR, LDC support
• Compression: H.265, H.264, MJPEG; multiple streams supported
• Storage: microSD/SDHC/SDXC slot, up to 128 GB
• Analytics and alarms: Motion detection, tampering detection, defocus detection, hallway view modes
• Protection: IP66 weatherproof, IK10 vandal resistance
• Mounting: Ceiling or wall mount, bullet form factor
• Connectivity: Wired Ethernet LAN
• Color and weight: Grey housing, approx. 900 g

How to use

Install the camera on a suitable ceiling or wall surface using the supplied mounting hardware and ensure the unit is positioned to cover the intended area with the desired field of view. Connect the camera to a PoE-capable Ethernet switch or provide separate power and wired network connection. Configure IP settings and video parameters through the camera web interface or compatible VMS, set codec and stream profiles, and adjust the motorized lens for the required framing and focus. Enable motion or tamper detection and schedule recording to local microSD or network storage as needed.

Usage recommendations

For optimal long-range detection and identification, mount the camera at a height that balances coverage and detail, avoid obstructions within the IR path, and enable WDR in scenes with high contrast. Use H.265 compression for reduced bandwidth and enable local SD backup to maintain recording during short network interruptions.