Harvia Cilindro PC70 Electric Sauna Heater 6.8 kW for 6-10 m³ Rooms

The Harvia Cilindro PC70 is a high-performance electric sauna heater designed to provide a traditional and comfortable sauna experience in home environments. With a power output of 6.8 kW, this floor-standing unit is engineered for efficiency and durability, featuring a robust stainless steel and steel housing that withstands the demanding conditions of a sauna. Its tall, cylindrical design allows for a large stone capacity, which ensures consistent heat distribution and soft steam generation throughout the room.

Advantages

The primary benefit of the Harvia Cilindro PC70 is its ability to deliver a versatile sauna experience, ranging from gentle, humid steam to intense, dry heat depending on where water is thrown on the heater. The floor-standing design is not only aesthetically pleasing but also allows for flexible installation within the sauna room. The high-quality materials used in its construction ensure a long service life, while the mechanical controls provide a straightforward and reliable user interface that is easy to operate for any sauna enthusiast.

Suitable for

• Home saunas with a room volume between 6 and 10 cubic meters
• Users seeking a traditional sauna experience with adjustable steam intensity
• Sauna installations where a floor-standing heater is preferred for design and heat distribution

When it may not be suitable

This heater is not suitable for sauna rooms smaller than 6 cubic meters or larger than 10 cubic meters, as it will not provide the intended heating performance. It is also not designed for commercial use in high-traffic public saunas where continuous operation is required.

Key specifications

• Power output: 6.8 kW
• Recommended room volume: 6–10 m³
• Housing material: Stainless steel and steel
• Control type: Mechanical thermostat and 4-hour timer
• Dimensions: 320 mm (width) x 320 mm (depth) x 930 mm (height)
• Power supply: 400/230 V, 50/60 Hz

How to use

To operate the Harvia Cilindro PC70, use the integrated mechanical controls located on the base of the unit. Set the desired temperature using the thermostat dial and use the timer to select the duration of operation, up to a maximum of 4 hours. Ensure that the sauna stones are correctly placed in the stone compartment without packing them too tightly to allow for proper air circulation. Once the heater is turned on, allow sufficient time for the stones to reach the required temperature before entering the sauna.

What to consider before purchase

• Ensure your sauna room volume falls within the 6–10 m³ range
• Verify that your electrical installation supports the 400/230 V power requirements
• Check the available floor space to accommodate the 320 x 320 mm footprint
• Confirm that the sauna room has adequate ventilation as per manufacturer guidelines

Usage recommendations

Always use sauna stones specifically designed for electric heaters and replace them periodically to maintain optimal heat efficiency and steam quality. Ensure the heater is installed by a qualified professional to comply with local electrical safety standards.