Rotary hammer Hikoki DH3628DCW2Z 36V battery, SDS Plus, 28 mm concrete, 950 RPM, 3.2 J

The Hikoki DH3628DCW2Z is a cordless rotary hammer with an SDS Plus chuck engineered for drilling and light chiselling in concrete and masonry. Powered by a 36 V battery, this tool delivers up to 950 RPM and up to 3.2 J of impact energy, enabling drilling in concrete up to 28 mm. Its compact 3.2 kg body and 360 mm width allow access in confined areas, making it suitable for a range of construction, renovation, and installation tasks.

Advantages

The cordless design removes the need for a power cable, increasing mobility on site and in confined spaces. The SDS Plus system ensures quick, secure bit changes and compatibility with a wide range of standard masonry drill bits. With a balance of rotational speed and impact energy, the tool supports efficient hole making in concrete up to 28 mm while remaining compact and relatively lightweight for reduced user fatigue. The robust construction and torque control help maintain consistent performance during repetitive drilling and light chiselling operations.

Suitable for

• Drilling anchor and through holes in concrete, block, and brick (up to 28 mm)
• Light chiselling tasks such as removing tiles, mortar or thin layers of plaster
• Installation work including mounting frames, brackets, and conduit routes
• Renovation and repair jobs in tight or elevated spaces

Key specifications

• Power source: 36 V battery (cordless)
• Chuck type: SDS Plus
• Maximum concrete drill capacity: 28 mm
• No-load speed: up to 950 RPM
• Impact energy: up to 3.2 J
• Tool weight: approximately 3.2 kg
• Overall width: 360 mm
• Operational modes: drilling and light chiselling

How to use

Select an appropriate SDS Plus drill bit or chisel for the material and required hole diameter. Secure the bit into the SDS Plus chuck according to the manufacturer's instructions and ensure the battery is charged and correctly installed. Choose the drilling mode for holes and the chiselling mode for light demolition work. Hold the tool with both hands, apply steady pressure without forcing the bit, and allow the hammer action and rotation to do the work. For larger holes, start with a smaller pilot hole if necessary and progress to the final diameter. After use, remove the battery and store the tool and accessories in a dry, secure place.

Usage recommendations

For best results and tool longevity, use high-quality SDS Plus bits rated for masonry and concrete, allow occasional cooling pauses during prolonged work, and wear appropriate personal protective equipment such as eye, ear, and respiratory protection. Match battery capacity to the expected workload and follow manufacturer service intervals for brushes and mechanical checks.