Network repeater Hikvision DS-1H34-0102P — Cat5e support, up to 500 m, 5 W, black

Hikvision DS-1H34-0102P is a compact network repeater designed to extend Ethernet signals over Cat5e cable for small to medium network installations. The device provides one input and two output channels with PoE relay functionality, supports extended transmission modes, and consumes up to 5 W. Its small footprint (71.6 × 95.5 × 26.1 mm) allows installation in racks, junction boxes or behind equipment where additional signal reach is required for IP cameras, switches or other network devices.

Advantages

The repeater supports standard Cat5e twisted-pair cabling and can increase link distance without changing endpoint devices. It offers an EXTEND mode for PSE output interfaces to boost single-stage transmission to longer distances and supports cascading multiple repeaters for greater overall reach. Low power consumption and a compact form factor simplify deployment in constrained spaces while maintaining 10/100 Mbps compatibility for typical surveillance and network equipment.

Suitable for

• Extending Ethernet links for PoE IP cameras in surveillance systems
• Connecting switches or network devices when cable runs exceed standard length limits
• Small installations requiring compact signal boosters in racks or junction boxes
• Environments using Cat5e cabling where 10/100 Mbps throughput is sufficient

Key specifications

• Cable type: Cat5e twisted-pair (standard)
• Transmission distance: up to 500 m using 4-stage cascade in 10/100 Mbps mode (terminal consumption < 5 W)
• EXTEND mode distance: single-stage extension up to 250 m; extended multi-stage reach up to 400 m (terminal consumption < 5 W)
• Channels: 1 input, 2 output with PoE relay function
• Power consumption: up to 5 W
• Data rate: 10/100 Mbps
• Dimensions: 71.6 × 95.5 × 26.1 mm
• Color: black

How to use

Install the Hikvision DS-1H34-0102P inline between the PSE (switch or injector) and the powered device using Cat5e cable. Choose normal 10/100 Mbps mode or enable EXTEND mode on the PSE output interface according to required distance. For longer reaches, cascade up to four repeaters in 10/100 Mbps mode or use EXTEND mode and plan stages to remain within the specified terminal power consumption limits (< 5 W). Mount the unit in a rack or junction box and ensure adequate ventilation and secure cable connections before powering the system.

Usage recommendations

Use quality Cat5e cabling and proper terminations to achieve the specified distances. Verify the power consumption of connected terminal devices remains below 5 W per channel when planning extended links or cascades. Test each segment after installation and prefer conservative staging (shorter segments) if environmental conditions or cable quality are uncertain.