Product specification Hikvision DS-2CD2442FWD-IW Cube IP security camera Indoor & outdoor 2688 x 1520 pixels Ceiling/wall

Hikvision DS-2CD2442FWD-IW is a cube-style IP security camera for ceiling or wall mounting, suitable for indoor and sheltered outdoor use. It captures up to 4.0 megapixel resolution (2688 × 1520) with a 2.8 mm fixed lens and supports both wired and wireless connectivity, including built-in Wi‑Fi and Power over Ethernet (PoE). The camera offers two video streams, wide dynamic range and noise reduction, on-board storage, two-way audio and optional PIR motion detection for flexible monitoring applications.

Advantages

The camera provides high-resolution 4 MP imaging with dual-stream capability for simultaneous recording and live viewing. 120 dB Wide Dynamic Range improves visibility in scenes with bright and dark areas, while 3D Digital Noise Reduction helps maintain clear video at lower bitrates. Built-in microphone and speaker enable two-way audio communication, and support for on-board storage up to 128 GB allows local recording. PoE support simplifies installation by carrying power and data over a single cable, with DC12V as an alternative.

Suitable for

• General indoor monitoring (shops, offices, common areas)
• Sheltered outdoor locations such as under eaves or covered entrances
• Ceiling or wall-mounted installations where discreet cube form is desired
• Environments requiring two-way audio or local recording

Key specifications

• Maximum resolution: 4.0 megapixels (2688 × 1520)
• Lens: fixed focal length 2.8 mm (other fixed options available)
• Lens horizontal viewing angle: 105.8°
• Sensor type: CMOS, 1/2.8" optical format
• Frame rate: up to 20 fps at full resolution
• Wide Dynamic Range: 120 dB
• Noise reduction: 3D Digital Noise Reduction
• On-board storage: microSD support up to 128 GB
• Audio: built-in microphone and speaker, two-way audio support
• Connectivity: Ethernet LAN, built-in Wi‑Fi, PoE (802.3af) and DC12V power input
• IR illumination range: up to 10 m
• Motion detection: PIR (Passive Infrared) support
• Mounting: ceiling or wall
• Suitable placement: indoor and sheltered outdoor
• Product colours: black and white

How to use

Mount the camera on a ceiling or wall using appropriate fixtures, ensuring the unit is protected from direct exposure to weather if installed outdoors. Connect to network via Ethernet or configure the built-in Wi‑Fi using the camera’s setup interface or a mobile app. If using PoE, connect a PoE switch or injector to supply power and data over one cable; alternatively, use a 12 V DC power supply. Insert a microSD card for local recording if required and enable two-way audio, PIR detection, and recording settings through the Hik‑Connect or iVMS‑4500 mobile applications or the camera’s web interface.

Usage recommendations

Place the camera under eaves or in covered areas if used outdoors to avoid direct exposure to rain. For optimal image quality, position the camera to minimize strong backlight and enable WDR when scenes include high contrast. Regularly check firmware updates and secure network access using strong passwords and network segmentation where possible.