Product specification Video doorbell Hikvision DS-KB8113-IME1(B) 2 MP 1080p Wired, PoE, IP65, 95°×54° viewing angle

The Hikvision DS-KB8113-IME1(B) is a wired 2 MP video doorbell delivering 1080p resolution with a 95° horizontal and 54° vertical field of view. Designed for indoor and outdoor installation, the unit supports PoE (IEEE 802.3af) or 12 V DC power, uses H.264 video compression and includes WDR to improve image clarity in varying lighting. Built on an embedded Linux platform with 256 MB RAM, the doorbell integrates a microphone and speaker with noise cancellation and volume control, and provides RS-485 and exit button interfaces for integration with access control systems.

Advantages

The device offers full HD video quality combined with a wide viewing angle, enabling clear identification of visitors at the door. IP65-rated protection makes it suitable for exposed external environments, while PoE support simplifies installation by allowing power and data over a single cable. On-board audio with noise cancellation supports two-way communication, and WDR helps maintain usable images in scenes with strong backlight or contrast.

Suitable for

• Residential front door monitoring and intercom
• Small office or retail entrance control
• Integration with access control systems requiring exit button or RS-485
• Outdoor locations requiring a weather-resistant video doorbell

Key specifications

• Image sensor: 2 MP, 1080p video resolution
• Field of view: 95° horizontal × 54° vertical
• Video compression: H.264
• Wide Dynamic Range (WDR) for improved contrast
• Audio: built-in microphone and speaker, G.711a codec, noise cancellation, adjustable volume
• Power options: Power over Ethernet (IEEE 802.3af) or 12 V DC
• Network: wired Ethernet support and 2.4 GHz Wi-Fi (IEEE 802.11b/g/n)
• Operating environment: -30 °C to 50 °C, 10–90% relative humidity
• Ingress protection: IP65 for outdoor use
• Processor and memory: embedded Linux OS with 256 MB RAM
• Interfaces: RS-485 port and exit button support
• Dimensions and weight: approximately 161.9 mm × 74.1 mm × 53.2 mm; 795 g

How to use

Mount the doorbell in a location that provides the intended coverage area within the 95°×54° viewing angles, at a height and angle suitable for visitor identification. Connect to the building network using Ethernet for PoE power or provide 12 V DC as an alternative. If required, configure the device through the network interface using supported management tools and set audio and volume preferences. Integrate the RS-485 or exit button connections to existing access control wiring as needed and verify WDR and image settings to suit local lighting conditions.

Usage recommendations

For reliable operation, use PoE when possible to reduce cabling and ensure continuous power. Place the unit where the main entry area is centered within the field of view and avoid pointing directly at strong light sources. Regularly check and clean the lens area to maintain image clarity and schedule firmware updates via the device management interface to keep performance and security up to date.