Video intercom Hikvision DS-KV6114-WBE1(O-STD) 4 MP, 2688×1520, IR night vision, IP65, omnidirectional mic

Hikvision DS-KV6114-WBE1(O-STD) is a 4 MP IP video intercom panel that provides up to 2688×1520 resolution video, selectable video modes from 480p to 1520p, and IR night vision effective to approximately 3 m. The unit supports H.264, H.265 and M-JPEG video streams and includes a multi-language on-screen display. Audio is handled via an omnidirectional microphone and supports multiple codecs (AAC, G.711a/u, G.722.1, G.726, G.729, OPUS). The device is designed for outdoor installation with IP65 protection and is intended for residential and light-commercial access control and entry monitoring.

Advantages

The panel delivers high-resolution imaging with flexible video-codec support to optimize bandwidth and storage. IR night vision and Wide Dynamic Range (WDR) improve visibility in low-light and high-contrast scenes. Built-in IP connectivity with standard PoE simplifies power and network installation while the omnidirectional microphone and multiple audio codecs enable clear two-way audio communication. The IP65-rated enclosure offers protection against dust and water for outdoor use.

Suitable for

• Apartment building entrance panels and intercoms
• Suburban homes and gated properties for visitor access control
• Small offices and light-commercial premises requiring entry monitoring
• Locations needing day/night video surveillance of entry points

Key specifications

• Image sensor: 4 MP camera, maximum resolution 2688×1520
• Selectable video output modes: 480p–1520p
• Video compression formats: H.264, H.265, M-JPEG
• Night vision: IR illumination up to approximately 3 m
• Audio: omnidirectional microphone; supported codecs AAC, G.711a/u, G.722.1, G.726, G.729, OPUS
• Ingress protection: IP65 for outdoor installation
• Viewing angle: approximately 150° (horizontal field of view)
• Power and network: standard IEEE802.3at Power over Ethernet (PoE)
• Built-in speaker for two-way communication
• Form factor and colour: wall-mounted panel, black finish

How to use

Mount the intercom panel at the chosen entry location using appropriate fasteners for wall surfaces and ensure the unit is installed within reach of a PoE-enabled network switch or injector providing IEEE802.3at power. Connect the network cable to enable video, audio and control functions; configure network and video settings via the device web interface or Hik-Connect mobile app. Set desired video mode, night-vision behavior, audio codec preferences and user access methods according to your site requirements. Integrate with door lock outputs and indoor stations as needed for remote unlocking and call transfer.

Usage recommendations

For reliable performance, install the panel where the camera has an unobstructed view of the entry area and avoid direct glare from strong light sources. Use PoE infrastructure rated for IEEE802.3at to ensure stable power. Configure H.265 when possible to reduce bandwidth and storage needs while maintaining image quality; choose H.264 or M-JPEG where compatibility with legacy systems is required. Regularly check seals and mounting hardware to preserve IP65 protection.