Borescope inspection camera Hikvision UT665P — 1 m cable, 4.3" HD display, 300K HD camera, IP67

The Hikvision UT665P is a handheld borescope inspection camera designed for visual checks in confined and difficult-to-access areas. It features a 1 m flexible probe with an IP67 rating for dust and water protection, a 4.3" HD color display for live viewing, and a 300K HD camera sensor that captures clear close-up images. The unit is battery-powered and intended to provide portable, on-site inspection capability for technicians and maintenance personnel.

Advantages

The UT665P combines a compact 4.3" HD display with a flexible 1 m probe to deliver clear real-time images in tight spaces. Its IP67 protection allows inspections in dusty or wet environments without immediate risk to the camera assembly. The 300K HD sensor produces usable detail for diagnostic tasks, while the handheld form factor and straightforward controls enable quick setup and operation at the point of work.

Suitable for

• HVAC system inspection and ductwork examination
• Plumbing inspections of pipes, drains and joints
• Automotive maintenance for engine bays and under-dash areas
• Industrial equipment diagnostics and machinery inspection
• Building maintenance, renovation and narrow cavity checks

Key specifications

• Probe length: 1 meter flexible cable
• Camera sensor: 300K HD imaging sensor
• Display: 4.3" HD color screen for live viewing
• Ingress protection: IP67-rated probe and camera head
• Form factor: Handheld inspection camera with integrated display
• Imaging: Real-time video preview on built-in screen

How to use

Power the unit according to the manufacturer's instructions and extend the flexible probe into the inspection area while observing the live image on the 4.3" display. Adjust probe positioning to achieve the required angle and distance; move slowly to maintain focus and image stability. Use the device controls to capture images or record video if these functions are available on the specific unit. After inspection, fully retract the probe, clean any contaminants from the camera head and probe, and store the instrument in a dry case.

Usage recommendations

Prior to insertion, verify that the environment is safe and free of sharp edges or excessive heat that could damage the probe. For wet or submerged inspections, confirm IP67 compliance of the camera head and avoid prolonged submersion beyond the rated limits. Clean the probe with a soft, damp cloth and mild detergent; avoid aggressive solvents. When inspecting electrical compartments, ensure power is isolated and follow standard safety procedures.