Hurry and order now – up to 50% off!
In cart {{totalProductsCount}} item(s)
Your cart is empty
Memory Module HP V6 DDR4 8 GB 3600 MHz
The HP V6 DDR4 8 GB 3600 MHz memory module is a single-module upgrade designed to increase system memory capacity and responsiveness. This 8 GB DDR4 DIMM operates at a clock speed of 3600 MHz with a CAS latency of 18 and a nominal voltage of 1.35 V. Built for compatibility with a wide range of desktops and compatible servers, the module supports faster data transfer and smoother multitasking for applications that benefit from higher memory bandwidth.
This HP memory module provides a balance of capacity and frequency that improves application loading times, system responsiveness and multitasking capabilities. The 3600 MHz clock speed and DDR4 architecture enable higher throughput compared with lower-frequency modules, while the single 8 GB module format allows straightforward capacity expansion without replacing existing memory. The 1.35 V operating voltage helps maintain power efficiency suitable for modern systems.
Power off the computer and disconnect it from the mains before installing the module. Open the system case according to the manufacturer’s instructions, locate the compatible DDR4 DIMM slot and align the module’s notch with the slot key. Firmly press the module into place until the retention clips lock. After installation, reconnect power and start the system. Check BIOS/UEFI and operating system memory reports to confirm the new module is recognized and operating at the expected speed.
For best results, install this DDR4 3600 MHz module in matched pairs when possible to enable dual-channel memory performance. Verify motherboard and CPU support for 3600 MHz operation and adjust BIOS/UEFI settings if necessary to achieve the rated frequency and timings. Ensure static-safe handling during installation and use compatible memory slots as specified by the system manual.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}