Hewlett Packard Enterprise Smart Array P410 controller board

The Hewlett Packard Enterprise Smart Array P410 controller board is a RAID controller designed for server environments that require improved data protection and sustained throughput. The controller supports multiple RAID levels (0, 1, 5, 10, 50 and 60) and is compatible with configurations that include up to 14 drives. Available memory configurations typically range from 512 MB up to 2 GB, enabling caching and improved write performance. The P410 is intended for integration in HP Enterprise systems and is identified by manufacturer code 462919-001H-RFB and EAN 5712505603345.

Advantages

The Smart Array P410 provides flexible RAID support to match different availability and performance requirements while allowing management of multiple drive bays. Its on-board memory options help accelerate read/write operations and cache data safely during normal operations. The controller's support for a wide range of RAID levels makes it suitable for balancing redundancy and capacity. The device is compatible with HP Enterprise platforms and follows standard interfaces for server storage controllers.

Suitable for

• Server storage arrays requiring RAID 0, 1, 5, 10, 50 or 60
• Data centers and rack servers with up to 14 drives
• Environments needing improved cache-backed throughput (512 MB–2 GB memory)
• HP Enterprise systems requiring a compatible Smart Array controller

Key specifications

• Brand: HP Enterprise
• Model: Smart Array P410
• MPN: 462919-001H-RFB
• EAN: 5712505603345
• Supported RAID levels: 0, 1, 5, 10, 50, 60
• Maximum supported drives: up to 14
• On-board memory: typically 512 MB to 2 GB (depending on configuration)
• Category: I/O adapters and controllers

How to use

Install the Smart Array P410 into a compatible HP Enterprise server slot according to the server maintenance guide. Connect the controller to the drive backplane or drive cages using the appropriate cables or connectors supplied with the server hardware. Configure RAID arrays through the server's BIOS/UEFI storage configuration utility or via the HP management software provided for Smart Array controllers. Allocate cache memory and select the desired RAID level based on redundancy and performance needs. After configuration, initialize and verify arrays, then restore or migrate data as required.

Usage recommendations

Use the P410 with supported HP Enterprise firmware and management tools to ensure compatibility and access to features such as battery or flash-backed cache support. Match the controller memory configuration (512 MB–2 GB) to your intended workload: larger caches improve write performance for write-heavy applications, while smaller caches may be adequate for read-heavy or archival tasks. Regularly monitor array health and perform firmware updates as provided by HP Enterprise.