Filters you can trust. Pure water every day.
In cart {{totalProductsCount}} item(s)
Your cart is empty
Memory module HP L34199-982 — 16 GB DDR4 3200 MHz 260-pin SO-DIMM
HP L34199-982 is a 16 GB DDR4 3200 MHz 260-pin SO-DIMM memory module designed for compatible laptops and small form-factor systems. Operating at a nominal voltage of 1.2 V, this RAM module provides a straightforward capacity and speed upgrade to improve multitasking and application responsiveness in systems that accept DDR4 SO-DIMM modules. The compact 260-pin form factor is intended for internal installation in notebooks and compact desktops that support DDR4 3200 memory.
This 16 GB DDR4 module increases available system memory to support more simultaneous applications and browser tabs, reducing paging and improving smoothness during multitasking. The 3200 MHz clock speed offers faster data transfer compared with lower-frequency DDR4 modules, helping workloads that benefit from higher memory bandwidth. The standard 260-pin SO-DIMM format and 1.2 V nominal voltage maintain compatibility with many laptop and small PC designs that specify DDR4 SO-DIMM modules.
Power off the laptop or small-form-factor PC and disconnect it from any power source. Access the memory compartment according to the device manufacturer’s instructions, typically by removing a service panel or keyboard bezel. Align the module with the SO-DIMM slot notch and insert it at a slight angle, then press down until the retaining clips lock into place. Reassemble the device, reconnect power and start the system; the operating system or firmware should recognize the additional memory automatically. For dual-channel operation, install modules in the recommended slot pairs as specified by the system manual.
Verify system compatibility before installation by checking the laptop or motherboard documentation for supported memory types, maximum capacity, and recommended slot configurations. When possible, pair this 16 GB module with an identical module for balanced performance; ensure BIOS/UEFI firmware is up to date to support DDR4 3200 operation.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}
{{ productComparisonGenerationError }}