-
Internal memory:
The amount of memory, usually measured in bytes (e.g. MB, GB), which is installed in the system's hardware.
-
512 MB
-
Weight:
Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
-
2.8 kg
-
Power consumption (typical):
Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
-
33.32 W
-
Rack mounting:
The type of mounting that can position devices in a shelving system (rack).
-
Yes
-
Flash memory:
-
256 MB
-
Memory type:
Type of memory in the device e.g. DDR3, SRAM (Static RAM).
-
DDR4-SDRAM
-
Operating relative humidity (H-H):
-
5 - 95
-
Storage temperature (T-T):
The minimum and maximum temperatures at which the product can be safely stored.
-
-40 - 70
-
Package weight:
Weight of the packaged product.
-
3710 g
-
Form factor:
The shape or design of the product.
-
1U
-
Operating temperature (T-T):
The minimum and maximum temperatures at which the product can be safely operated.
-
-5 - 45
-
Power source:
What is providing power for the product e.g. mains electricity.
-
AC/PoE
-
Height:
The measurement of the product from head to foot or from base to top.
-
43.6 mm
-
LED indicators:
-
Y
-
Width:
The measurement or extent of something from side to side.
-
442 mm
-
Depth:
The distance from the front to the back of something.
-
220 mm
-
Noise level:
The amplitude level of the undesired background noise, usually measured in decibels (db).
-
52.8 dB
-
Networking standards:
The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
-
IEEE 802.3af, IEEE 802.3at
-
Heat dissipation:
The heat generated by the power supply.
-
113.68 BTU/h
-
Power over Ethernet (PoE):
The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
-
Yes
-
Input current:
-
6
-
Package depth:
The distance from the front to the back of the packaging.
-
360 mm
-
Package height:
The distance from the top to the bottom of the packaging.
-
90 mm
-
Package width:
The distance from one side of the packaging to the other.
-
550 mm
-
Number of fans:
The quantity of fans (apparatus with rotating blades that creates a current of air for cooling or ventilation).
-
2 fan(s)
-
Housing material:
What the casing of the product is made of.
-
Metal
-
10G support:
The product can use Oracle 10G, which is a database management system introduced in 2003.
-
Yes
-
Fiber optic connector:
This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
-
SFP, SFP+
-
International Protection (IP) code:
The IP code classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. Another example is the Sony Xperia Z Ultra, one of the first cellular phones to be IP-rated; it is rated at IP58 and marketed as "dust resistant" and can be "immersed in 1.5 meter of freshwater for up to 30 minutes".
-
IP20
-
AC input frequency:
-
50/60
-
AC input voltage:
The voltage of the AC electricity that is inputted into the product.
-
100 - 240
-
Power consumption (max):
The maximum amount of power used by the device.
-
38.58 W
-
Power supply included:
There is a power supply with this product.
-
Yes
-
Installed SFP+ modules quantity:
An SFP ("small form-factor pluggable transceiver") is a transmitter/receiver which interfaces a network device motherboard (e.g. in a switch, router) to a fibre optic or copper network cable. The enhanced small form-factor pluggable (SFP+) is an enhanced version of the SFP that supports data rates up to 10 Gbit/s. The "SFP+ ports quantity" is the number of ports for SFP+ connections in a device.
-
0
-
Installed SFP modules quantity:
An SFP ("small form-factor pluggable transceiver") is a transmitter/receiver which interfaces a network device motherboard (e.g. in a switch, router) to a fibre optic or copper network cable. The "SFP ports quantity" is the number of ports for SFP connections in a device.
-
0
-
Basic switching RJ-45 Ethernet ports type:
The type/category of basic switching RJ-45 Ethernet ports (sockets).
-
Gigabit Ethernet (10/100/1000)
-
Basic switching RJ-45 Ethernet ports quantity:
The number of basic switching RJ-45 Ethernet ports (sockets).
-
24
-
SFP module slots quantity:
-
2
-
SFP+ module slots quantity:
-
2
