Ball valve gas IDMAR DN 25 WKP 2c 1.6–4.0 MPa

The Ball valve gas IDMAR DN 25 WKP 2c 1.6–4.0 MPa is a full-bore shut-off valve designed for gas service in DN 25 pipelines. Intended for industrial and commercial gas installations, this valve provides reliable on/off control and is specified to operate within the pressure range of 1.6 to 4.0 MPa. Constructed for gas handling, its full-bore design minimizes flow restriction and pressure drop when in the open position.

Advantages

This gas ball valve offers tight shut-off performance and straightforward quarter-turn operation, enabling fast and reliable isolation of gas flow. Its full-bore configuration ensures minimal flow resistance and facilitates pigging or cleaning where applicable. The valve is built to meet the pressure requirements of systems operating between 1.6 and 4.0 MPa and is suitable for repeated operation under normal service conditions, providing consistent mechanical performance and serviceability.

Suitable for

• Industrial gas distribution lines with DN 25 connections
• Commercial gas installations requiring on/off isolation
• Systems operating within 1.6–4.0 MPa pressure range
• Applications where full-bore flow is required to reduce pressure loss

Key specifications

• Nominal diameter: DN 25
• Design: full-bore ball valve
• Fluid: gas
• Rated operating pressure: 1.6–4.0 MPa
• Operation: quarter-turn on/off control

How to use

Install the valve in line with the pipeline axis, ensuring correct alignment and secure connections suitable for DN 25 piping. Operate the valve by turning the handle a quarter turn to move between fully open and fully closed positions. Verify that the valve is compatible with the system pressure and gas type before commissioning. Follow standard isolation and purge procedures for gas systems during installation, maintenance, or removal to ensure safety.

Usage recommendations

Inspect and test the valve after installation and periodically during service for leakage and proper operation. Use appropriate tools and follow local safety regulations when working with pressurized gas systems. For prolonged or high-cycle service, schedule routine maintenance to check seats, seals, and mechanical linkages to ensure continued reliable shut-off performance.