UPS Infosec X1+ 1000VA 500W line-interactive tower with AVR, 2× FR/Schuko outlets, USB-B, 9Ah battery

Infosec X1+ is a line-interactive tower UPS providing 1 kVA / 500 W output capacity with Automatic Voltage Regulation (AVR) and a pseudo-sine output waveform. It is equipped with a sealed 12 V, 9 Ah VRLA battery and supports cold-start. Typical backup time is approximately 31 minutes at half load and 10 minutes at full load. The unit offers automatic restart, overload/overcharge protection and operates at 50/60 Hz with an output voltage of up to 220 V. The tower design is compact and suitable for installation in home offices and small IT environments.

Advantages

The UPS combines AVR-based voltage regulation with line-interactive topology to stabilise supply voltage and protect connected electronics from brownouts and surges. Its sealed lead‑acid (VRLA) battery provides reliable short-term backup without maintenance, while cold-start capability allows the unit to start from battery power. Compact tower form factor, low noise level (40 dB) and included USB Type‑B communication make integration with desktop systems and monitoring software straightforward.

Suitable for

• Home offices and workstations
• Small servers and NAS devices
• Network equipment such as routers and switches
• Point-of-sale terminals and small retail systems

Key specifications

• Output power: 500 W (1 kVA apparent)
• Topology: Line‑Interactive with Automatic Voltage Regulation (AVR)
• Output waveform: Pseudo-sine
• Input voltage range: 162–290 V
• Input / output frequency: 50/60 Hz
• Output voltage regulation: ±10%
• Battery: Sealed Lead Acid (VRLA), 12 V, 9 Ah
• Typical backup time: ~31 min at half load, ~10 min at full load
• Battery recharge time: ~8 hours
• Noise level: 40 dB
• Operating temperature range: 0–40 °C
• Relative humidity: 0–90% (non-condensing)
• Form factor and colour: Tower, black
• Dimensions (H×W×D): 138 × 96 × 286 mm
• Weight: 4.8 kg
• AC outlets: 2 × FR/Schuko
• USB: 1 × USB Type‑B for communication

How to use

Place the UPS in a well‑ventilated location on a stable, level surface and connect it to a grounded AC supply. Install the UPS battery according to the supplied manual if not preinstalled. Connect critical equipment to the protected AC outlets and, if needed, connect the USB Type‑B port to a computer for monitoring and shutdown software. The unit will provide voltage regulation during normal operation and switch to battery power automatically during mains failure; use the cold‑start function to start the UPS from battery when AC mains are absent.

Usage recommendations

Use the UPS in a well‑ventilated environment to avoid overheating. Regularly check battery condition and replace the VRLA battery according to manufacturer guidance to ensure reliable backup. Do not exceed rated output power and distribute loads across the two AC outlets appropriately.