InLine RJ45 Manual Network Switch 1 to 2 with 3 RJ45 Sockets Fast Ethernet

The InLine RJ45 Manual Network Switch 1 to 2 with 3 RJ45 Sockets Fast Ethernet is a desktop device designed to facilitate manual switching between network connections. Featuring a compact black housing, this manual network switch enables users to route Fast Ethernet signals efficiently without requiring complex software configuration or an external power supply. It provides a reliable hardware-based solution for environments that require straightforward port sharing and alternate line selection.

Advantages

This manual RJ45 network switch operates entirely passively, meaning it does not need a power supply or active components to function. Its mechanical design ensures high reliability and simple operation through a direct physical switch. The 1:1 pin assignment allows the device to transmit telephone, ISDN, and network signals transparently. Because no driver installation or software setup is needed, it can be integrated into existing cable layouts immediately.

Suitable for

• Switching a single network device between two different network lines
• Sharing one network line between two different devices
• Routing unshielded Fast Ethernet connections in home offices
• Managing basic ISDN or telephone signal routing manually

This device may not be suitable for high-speed networks that exceed Fast Ethernet limits, as it only supports data transfer rates up to 100 Mb/s. It is also unshielded, making it inappropriate for environments with high electromagnetic interference. Furthermore, it cannot be managed remotely or automatically since all switching operations must be performed manually.

Key specifications

• Port configuration: 1 to 2 or 2 to 1 via 3 RJ45 sockets
• Supported data transfer rate: Up to 100 Mb/s
• Pin assignment: 1:1, unshielded
• Operating mechanism: Manual and mechanical
• Dimensions: 80 mm width, 110 mm depth, 25 mm height
• Colour: Black

To use the InLine manual network switch, connect your primary patch cable to one of the RJ45 sockets and the secondary cables to the remaining sockets. Ensure that the connected cables match the unshielded specification and operate within the supported speed limit. Use the physical switch on the desktop unit to select the desired connection path manually.

What to consider before purchase

• Verify that your network speed does not exceed 100 Mb/s
• Check if unshielded cables are compatible with your networking environment
• Confirm that manual physical access to the switch is practical for your setup

Usage recommendations: Place the device on a stable desktop surface within easy reach for convenient manual switching. Avoid using this switch in environments exposed to heavy electrical interference due to its unshielded design.