Concrete Drill Bit Irwin Speedhammer Plus 14 x 600 mm (10502011)

Irwin Speedhammer Plus 14 x 600 mm concrete drill bit is a long masonry bit designed for use with rotary hammers featuring an SDS-plus shank. With a 14 mm diameter and 600 mm overall length, this bit is intended for drilling deep holes in concrete, brick and other masonry materials. The carbide tip and solid flute design provide impact resistance and efficient debris removal for through-drilling and anchoring applications on construction and installation sites.

Advantages

The SDS-plus connection ensures secure, quick tool-to-bit engagement for sustained heavy-duty operation. A carbide-tipped head delivers precise cutting performance and improved wear resistance during impact drilling in concrete and mixed masonry. The extended 600 mm length enables deeper holes without extensions or additional tooling, while the flute profile promotes faster dust evacuation to reduce clogging and overheating during continuous use.

Suitable for

• Drilling deep anchor and through holes in reinforced and non-reinforced concrete
• Installing dowels, rebar sleeves and long anchors in masonry
• Electrical and plumbing service penetrations through block or brick walls
• Construction and renovation tasks requiring long-reach masonry drilling

Key specifications

• Diameter: 14 mm
• Total length: 600 mm
• Shank type: SDS-plus compatible
• Tip material: carbide
• Intended use: concrete, brick and masonry

How to use

Fit the Irwin Speedhammer Plus bit into an SDS-plus rotary hammer according to the tool manufacturer's instructions, ensuring the shank is fully seated and locked. Select hammer-drill mode for concrete and apply steady axial pressure while allowing the tool's impact action to do the work. Withdraw the bit periodically to clear dust and debris from the hole, and use appropriate drill speed and feed for the material being drilled. Wear suitable personal protective equipment including eye protection, gloves and hearing protection while operating the rotary hammer.

Usage recommendations

Use the bit with an SDS-plus rotary hammer rated for the intended drilling depth and material. For reinforced concrete, probe the hole regularly for rebar and adjust technique as needed; when drilling continuous deep holes consider using a flushing or dust extraction system to maintain performance and prolong bit life.