Rack shelf IT-BUDGET 19" pull-out full-extension 30 kg load 550 mm black

IT-BUDGET 19" pull-out full-extension shelf is a steel mounting shelf designed for standard 19-inch server cabinets and network racks. With a depth of 550 mm and a rated load capacity of 30 kg, the shelf supports servers, network appliances, peripheral devices and instrumentation while allowing front access through full-extension slides. The black powder-coated finish provides corrosion resistance and a uniform appearance inside data center or equipment cabinets.

Advantages

The pull-out mechanism with full-extension slides enables easy access to installed equipment for maintenance, cabling and quick inspections without fully removing devices from the rack. Steel construction ensures stable support for equipment up to 30 kg while the 550 mm depth accommodates most rack-mountable servers, switches, storage devices and peripherals. The design provides secure mounting in standard 19" profiles and helps to keep cabling organized behind the device.

Suitable for

• Mounting small rack servers and 1U/2U appliances that do not require fixed mounting brackets
• Holding network switches, patch panels or power supplies that need occasional access
• Placing backup storage devices, external hard drives or peripherals inside a cabinet
• Use in office server rooms, telecommunications closets and small data centers

When it may not be suitable

This shelf is not intended for permanently mounting heavy enterprise servers or appliances that exceed the 30 kg rated load. Equipment that requires front and rear rail mounting or shock isolation may not be adequately supported by a single shelf. For devices needing deeper chassis clearance than 550 mm, a deeper shelf or dedicated rack rails should be considered.

Key specifications

• Compatibility: standard 19" rack/cabinet mounting
• Depth: 550 mm usable depth
• Rated load capacity: 30 kg
• Material: steel construction with protective coating
• Finish: black powder-coated surface
• Slide type: pull-out full-extension slides for front access

How to use

Install the shelf into the 19" cabinet by aligning the mounting holes with the rack profile and securing the shelf using appropriate rack screws and cage nuts. Slide the shelf into position and verify the full-extension mechanism operates smoothly. Place the supported equipment on the shelf, ensuring its weight remains within the 30 kg limit and that the device is centered to avoid uneven loading. Route cables through the rear of the cabinet and secure them to prevent strain on connectors when the shelf is extended.

What to consider before purchase

• Measure the depth of your rack and the chassis depth of the equipment to confirm 550 mm is sufficient
• Verify the equipment weight does not exceed the 30 kg rated capacity
• Check whether devices require front-and-rear rail mounting or vibration isolation
• Ensure your cabinet has compatible 19" mounting hardware (screws and cage nuts)

Usage recommendations

Distribute weight evenly on the shelf and avoid sudden heavy loads; test the slide action after installation and periodically check fasteners. Use cable ties or cable management accessories to secure connections, and consider additional support for long or heavy devices.