Garage door protection strip IWH 019042 — white/red PU foam, self-adhesive

IWH Garage door protection strip 019042 is a self-adhesive polyurethane (PU) foam profile in white and red designed to protect garage doors, frames and adjacent surfaces from impact, abrasion and paint damage. The low-profile foam strip cushions blows from vehicles and equipment while the red contrast improves visibility at edges. The product is intended for straightforward surface mounting on door edges, jambs or nearby structures where a slim, resilient protective edge is required.

Advantages

The PU foam composition provides flexible shock absorption while maintaining a thin, unobtrusive profile. A pressure-sensitive adhesive backing enables fast installation without additional fasteners or tools, and the white/red color combination offers both visual contrast for safety and a clean appearance that suits residential and light commercial settings. The strip resists surface abrasion and reduces the risk of paint chipping and metal deformation at contact points.

Suitable for

• Protecting garage door edges from vehicle bumping during parking
• Cushioning door jambs and frames to prevent paint and metal damage
• Temporary or semi-permanent edge protection in rental garages and storage areas
• Low-profile protection for light commercial overhead and sectional doors

Key specifications

• Material: polyurethane (PU) foam
• Finish: white with red contrasting stripe
• Mounting: pressure-sensitive self-adhesive backing for surface application
• Profile: low-profile edge strip suitable for door edges and frames
• Function: impact absorption, abrasion protection, visual edge marking

How to use

Clean and dry the mounting surface thoroughly to remove dust, grease and loose paint. Measure and cut the protection strip to the required length with a sharp knife or scissors. Peel off the protective liner from the adhesive backing and press the strip firmly onto the door edge or frame, ensuring full contact along the adhesive surface. Apply even pressure along the length to secure the bond; allow adhesion to develop according to ambient temperature and surface conditions before subjecting to heavy impacts.

Usage recommendations

For best adhesion, apply at temperatures above 10°C (50°F) and on non-porous, stable surfaces. Replace the strip if the foam shows significant wear, compression set, or if the adhesive bond deteriorates. Avoid prolonged exposure to strong solvents or abrasive cleaning agents that may degrade the foam or adhesive.