JULTEC JAP307TSD socket-outlet 2 x IEC + F, 2150 MHz, -7 dB, Silver

JULTEC JAP307TSD socket-outlet 2 x IEC + F, 2150 MHz, -7 dB, Silver is a wall-mounted TV/SAT outlet that combines two IEC female connectors and one F connector in a single silver housing. It is designed to distribute satellite and terrestrial signals up to 2150 MHz while providing a fixed attenuation of approximately 7 dB. The compact design suits standard flush-mounted installation boxes and offers a tidy connection point for set-top boxes, TV tuners and satellite receivers where dual IEC outputs and moderate attenuation are required.

Advantages

The JAP307TSD provides integrated dual IEC outputs alongside an F connector in a single plate, reducing the need for additional adapters or splitters. Its frequency range up to 2150 MHz covers current satellite transponders and many terrestrial applications, while the built-in -7 dB attenuation helps adapt signal levels to avoid receiver overload. The silver finish gives a neutral appearance that fits standard interior installations, and the compact wall-mount form factor allows straightforward integration into existing outlet boxes.

Suitable for

• Connecting one satellite feed to two IEC-equipped devices (e.g., TV tuner and set-top box) with moderate attenuation
• Wall-mounted installations requiring an integrated F connector for incoming cable and two IEC outputs for local devices
• Installations where signal reduction of approximately 7 dB is needed to prevent receiver saturation

When it may not be suitable

This socket-outlet provides a fixed attenuation of -7 dB and is not intended for applications that require variable or switchable attenuation. It is also not suited for systems that need active amplification or filtering beyond the specified frequency range. For installations requiring more than two IEC outputs or integrated multiswitch functionality, a different device will be required.

Key specifications

• Connector configuration: 2 x IEC female outputs + 1 x F connector
• Frequency range: up to 2150 MHz
• Attenuation: approximately -7 dB (fixed)
• Mounting style: flush wall-mounted outlet plate
• Finish: silver

How to use

Install the JAP307TSD into a standard flush-mount wall box following local electrical and coaxial installation regulations. Connect the incoming satellite or antenna feed to the F connector and attach cables from the two IEC outputs to the target devices. Ensure all F- and IEC-connections are tightened appropriately and test signal levels at each receiver. Because the unit provides fixed attenuation, verify that the resulting signal levels are adequate for the connected equipment; adjust upstream amplification if necessary.

What to consider before purchase

• Whether a fixed -7 dB attenuation matches the required signal level for your receivers
• Compatibility of device connectors (F connector for incoming feed and IEC for local devices)
• Required frequency range coverage up to 2150 MHz for your satellite or terrestrial sources
• Mounting requirements and available flush wall box depth

Usage recommendations

For stable reception, check signal levels on connected receivers after installation and avoid excessive cable lengths or poor-quality coaxial cables. If signal strength is too low after the fixed attenuation, consider adding a suitable low-noise amplifier before the outlet; if signals are too high, ensure the -7 dB attenuation is sufficient or use additional attenuation upstream.