Polishing Pad K2 L612 — medium-abrasive foam pad for automotive polishing

The K2 L612 polishing pad is a medium-abrasive foam accessory designed for automotive paint correction and surface refinement. Made to be used with rotary and dual-action polishers, this replaceable pad targets light to moderate defects such as swirl marks, fine scratches and surface oxidation, delivering even abrasion while preparing the paintwork for finishing steps like waxing or sealing. The pad's foam density balances cutting ability with finishing properties, making it suitable for both professional detailers and informed DIY car care enthusiasts.

Advantages

The medium-abrasive foam structure provides consistent material removal without aggressive cutting, helping to reduce the appearance of swirl marks and light scratches while preserving clear coat integrity. Its design ensures even pad contact and heat distribution during polishing, which minimizes the risk of localized overworking. The pad is replaceable and compatible with common backing plates, enabling easy swap-out and maintenance. Its versatility allows use with a range of polish formulations for correction and refinement stages.

Suitable for

• Removing swirl marks and light to moderate surface scratches
• Refining paint gloss prior to applying wax or sealant
• Correcting oxidation and light surface defects on automotive paint
• Use with rotary and dual-action polishers for mid-level correction

Key specifications

• Material: medium-density foam engineered for balanced cutting and finishing
• Abrasion level: medium (suitable for light to moderate defect removal)
• Compatibility: intended for use with standard backing plates on rotary and dual-action polishers
• Application stage: correction and refinement before protective coatings

How to use

Attach the polishing pad securely to a compatible backing plate following the tool manufacturer's instructions. Apply a small amount of an appropriate polishing compound to the pad or directly to the work surface. Start the polisher at low speed to spread the product and establish pad contact, then increase speed as needed for correction while maintaining smooth, overlapping passes. Keep the pad flat against the surface and avoid excessive pressure or prolonged dwell in one spot. After polishing, remove residue with a clean microfiber cloth and inspect the finish before proceeding to waxing or sealing.

Usage recommendations

For best results, pair the pad with a polish formulated for mid-level correction and test on an inconspicuous area first. Replace the pad when it shows signs of deterioration or contamination to avoid marring. Maintain proper tool speed and minimal pressure to protect the clear coat.