Polishing Pad K2 L641 M14 150 mm — abrasive foam pad for polishers

The K2 L641 M14 150 mm polishing pad is an abrasive foam accessory designed for use with rotary and forced-rotation polishers. Its 150 mm diameter and M14 thread make it compatible with many standard backing plates, and the foam construction balances cut and finish to prepare surfaces and perform light polishing on automotive paint, gelcoat and clear coats. The pad is intended for removal of minor imperfections and for final finishing steps where gentle abrasion and even polishing are required.

Advantages

The abrasive foam structure delivers controlled material removal while maintaining a fine surface texture suitable for subsequent finishing. The 150 mm size provides a useful working area for panel-level work without compromising control. The M14 threaded attachment offers secure fitting to common polishers, ensuring stable rotation and reduced vibration during use. The pad’s construction is tailored to work on paint and gelcoat surfaces without aggressive cutting that could damage thin coatings when used correctly.

Suitable for

• Light defect removal on automotive paintwork
• Finishing passes on clear coats and gelcoat
• Surface preparation before sealing or waxing
• Use with rotary and forced-rotation polishers fitted with M14 backing plates

Key specifications

• Diameter: 150 mm
• Attachment: M14 threaded mount (for compatibility with matching backing pads)
• Material: abrasive foam
• Intended use: light polishing and surface preparation on painted and gelcoat surfaces

How to use

Attach the polishing pad to a compatible M14 backing plate and secure it according to the polisher manufacturer’s instructions. Start with a low speed to center the pad and ensure even contact, then adjust speed and pressure according to the surface condition and the polishing compound being used. Move the polisher steadily across the panel in overlapping passes, avoiding prolonged dwell in one spot. After use, clean the pad of residual polish by rinsing or using a dedicated pad cleaning brush and allow to dry before storage.

Usage recommendations

For best results, use the K2 L641 pad with a light to medium-cut polish for minor defect removal, and switch to a finishing pad or finer abrasive for final gloss enhancement. Test on an inconspicuous area before full application and follow safety guidelines for rotary polishers, including appropriate PPE and secure work environment.