Brake Fluid K2 DOT 3 250 ml (0.25 L) bottle

K2 DOT 3 brake fluid in a 250 ml (0.25 L) bottle is a hydraulic fluid formulated for use in automotive brake and clutch systems that require DOT 3 specification. It is intended for refilling or topping up master cylinder reservoirs and for routine maintenance of standard passenger vehicles. The formulation balances boiling point and viscosity to ensure consistent hydraulic performance under normal driving conditions.

Advantages

This DOT 3 fluid offers stable viscosity and predictable compressibility characteristics suitable for conventional hydraulic brake systems. Packaged in a 250 ml bottle, it is convenient for small repairs and reservoir top-ups without excess waste. The product is compatible with systems designed for glycol-based DOT 3 brake fluids and supports safe operation when used according to manufacturer recommendations.

Suitable for

• Refilling brake fluid reservoir on passenger cars that specify DOT 3
• Top-up during routine brake and clutch maintenance
• Small repairs and home garage servicing of hydraulic systems
• Compatibility checks when replacing fluid in older vehicles with non-ABS or ABS systems specifying DOT 3

Key specifications

• Volume: 250 ml (0.25 L)
• Specification class: DOT 3 (glycol-based)
• Intended systems: hydraulic brake and clutch systems
• Packaging: single-use consumer bottle suitable for controlled pouring

How to use

Before use, consult the vehicle owner’s manual to confirm DOT 3 is the recommended specification. Clean the reservoir cap area to avoid contamination, then remove the cap and carefully add fluid until the reservoir reaches the correct level. When performing a full fluid change or bleeding brakes, follow the vehicle manufacturer’s bleeding procedure and use appropriate protective equipment. Close the reservoir securely after filling and check for any leaks in the hydraulic system.

Usage recommendations

Store the bottle tightly closed in a cool, dry place away from direct sunlight. Do not mix with DOT 4 or DOT 5.1 unless the vehicle manufacturer permits mixing; avoid mixing with silicone-based DOT 5 fluids. Dispose of any used or contaminated fluid in accordance with local regulations.