Car care aerosol spray K2 K2-SMAR SUCHY 400 ml — dry lubricant, MPN W120

K2 K2-SMAR SUCHY 400 ml is an aerosol dry lubricant formulated for vehicle maintenance and general mechanical use. The product delivers a thin, non-greasy protective film that reduces friction between moving parts, prevents sticking and provides moisture and corrosion protection for metal surfaces. Packaged in a 400 ml spray can, the dry lubricant is suitable for use on components where oil-based lubricants would attract dirt or leave residues.

Advantages

The dry aerosol spray creates a low-friction, non-sticky coating that does not drip or run, making it suitable for vertical and overhead applications. It protects against moisture and reduces the risk of corrosion on treated surfaces. Because it forms a thin, clean film, it minimizes dust and dirt adhesion compared with wet oils and greases. The product is compatible with a range of mechanical parts including hinges, locks, cables and sliding mechanisms.

Suitable for

• Lubricating door hinges and trunk hinges
• Protecting and freeing vehicle locks and latches
• Maintaining control cables and linkages
• Reducing friction on sliding mechanisms and rails
• Protecting small metal components from moisture and corrosion

Key specifications

• Form: aerosol spray with dry-film lubricant
• Volume: 400 ml spray can
• Film properties: thin, non-greasy, quick-drying
• Performance: reduces friction and sticking on moving parts
• Protection: moisture resistance and anti-corrosion properties for metal surfaces

How to use

Shake the can well before use. Apply a short, even spray from a distance of about 15–25 cm to the cleaned and degreased surface. Allow the product to dry and form a film; remove any excess residue if necessary. For hard-to-reach areas or joints use short bursts and, if required, repeat application after testing on a small area. Ensure adequate ventilation when applying in enclosed spaces and avoid spraying on hot surfaces or near open flames.

Usage recommendations

For best results, clean surface contamination such as heavy grease, rust flakes or dirt prior to application. Test on an inconspicuous area if compatibility with plastics or painted surfaces is uncertain. Store the can in a cool, dry place away from direct sunlight and sources of heat.