KAN-therm elbow PP GZ 32 x 1" model 04104534 — polypropylene threaded pipe fitting

KAN-therm elbow PP GZ 32 x 1" model 04104534 is a polypropylene (PP) threaded pipe fitting designed to change the direction of a pipeline by 90°. The fitting is intended for use with 32 mm pipes and a 1" male threaded connection, combining a solvent-resistant polymer body with a threaded metal or plastic counterpart for secure junctions in water supply, heating and plumbing systems. Its lightweight construction and resistance to corrosion make it a practical choice where a durable plastic elbow with a threaded outlet is required.

Advantages

This KAN-therm elbow offers chemical and corrosion resistance typical of polypropylene, low weight for easier handling and installation, and dimensional stability across common service temperatures. The threaded 1" outlet provides compatibility with standard threaded components, allowing for straightforward connections without welding or fusion. The geometry ensures a compact 90° change of direction while maintaining a clear internal flow path.

Suitable for

• Domestic and commercial cold and hot water distribution (where PP compatibility is acceptable)
• Heating circuits and return lines with compatible materials
• Plumbing installations that require a 90° threaded elbow connection
• Systems that benefit from corrosion- and chemical-resistant plastic fittings

When it may not be suitable

The polypropylene elbow may not be appropriate for applications requiring very high temperatures or pressures beyond the rated limits of PP fittings. It is also not suitable where metal-to-metal mechanical strength is required, or where specific approvals for aggressive chemical exposures or potable water certification beyond standard PP performance are mandated. Verify system temperature and pressure requirements and local regulations before selection.

Key specifications

• Material: polypropylene (PP)
• Connection type: 32 mm socket to 1" male thread
• Angle: 90° elbow
• Typical uses: water supply, heating, plumbing installations
• Characteristics: corrosion resistant, lightweight, chemical resistant

How to use

Install the elbow by preparing the 32 mm pipe end according to the chosen joining method for PP components (cut square, deburr, and clean). Thread the 1" male connection into the corresponding female thread using appropriate sealing material such as PTFE tape or a thread sealant compatible with potable water if required. Tighten to the recommended torque for the threaded connection, avoiding overtightening. Ensure pipe alignment and support to avoid mechanical stress on the fitting during operation. Follow applicable installation standards and manufacturer guidelines for pressure and temperature limits.

What to consider before purchase

• Confirm system pipe diameter is 32 mm and that 1" threaded mating parts match the required thread standard
• Verify operating temperature and pressure of the system are within polypropylene limits
• Ensure chemical compatibility with any fluids handled in the system
• Check local regulations and certification requirements for potable water or heating applications

Usage recommendations

Use appropriate thread sealing methods for the 1" connection and provide mechanical support to avoid point loads on the elbow; avoid exposure to temperatures and chemicals outside PP specifications to maintain service life.