KAN-therm pipe tee 110 mm model 04105111, PP plumbing fitting

KAN-therm pipe tee 110 mm model 04105111, PP plumbing fitting is a three-way polypropylene connector intended for use in sewage, waste and stormwater systems with 110 mm pipework. The fitting provides a reliable branch connection that directs flow between a main run and a perpendicular branch, suitable for both new installations and repairs where chemical resistance and low weight are required.

Advantages

The polypropylene construction offers corrosion and chemical resistance, low thermal conductivity and reduced weight compared with metal alternatives. Its smooth internal surface minimises fouling and supports consistent flow. The tee is manufactured to provide dimensional stability and uniform wall thickness for predictable hydraulic performance and straightforward joining to compatible 110 mm pipes.

Suitable for

• Sewage and wastewater drainage systems with 110 mm pipes
• Stormwater and roof drainage installations
• Domestic and commercial building drainage branch connections
• Repair and modification of existing 110 mm plastic pipe runs

Key specifications

• Material: polypropylene (PP)
• Main diameter: 110 mm
• Type: three-way tee connector for branch connections
• Application: sewage, waste, stormwater drainage
• Surface: smooth internal bore to reduce deposits
• Mechanical properties: chemical resistance and low weight characteristic of PP

How to use

Install the PP tee by preparing the pipe ends to be clean, square and free of debris. Use compatible solvent welding, push-fit or rubber-seal joining methods as required by the system design and local regulations; ensure the chosen joining technique matches the tee and pipe material. Insert the branch and run pipes fully into the fitting, aligning the connection to maintain flow direction. After assembly, check for alignment and perform a pressure or leak test according to applicable standards before covering or backfilling.

Usage recommendations

Confirm compatibility with the existing 110 mm pipe system and select appropriate joining methods and gaskets where necessary. Avoid exposure to open flames or temperatures beyond the material's rated range during installation. For buried or mechanically loaded installations, consider additional mechanical protection or proper bedding to prevent point loads on the fitting.