KAN-therm press tee with pressed ring 20x2 mm to G1/2 internal thread GW Press (1009258001)

KAN-therm press tee with pressed ring 20x2 mm to G1/2 internal thread GW Press is a plumbing fitting designed to connect 20x2 mm multilayer or metal-plastic pipe to a G1/2 female threaded outlet. The fitting provides two press connections for the pipeline and one internal G1/2 thread for attaching valves, adapters or fixtures. It is intended for potable water and heating systems where a permanent, reliable press joint combined with a threaded outlet is required.

Advantages

The fitting features press technology with a pressed ring that ensures a secure, leak-resistant joint without the need for soldering or welding. Materials and construction are suited for potable water and heating applications, offering resistance to typical system pressures and temperatures. The integrated G1/2 internal thread provides a straightforward interface for standard valves and accessories, simplifying installation and minimizing additional adapters.

Suitable for

• Connecting 20x2 mm multilayer or metal-plastic pipes in potable water systems
• Branching to G1/2 threaded valves, taps or sensors in heating installations
• Retrofit work where a press joint and threaded outlet are required
• Domestic and light commercial plumbing applications

Key specifications

• Pipe connection type: press connection with pressed ring for 20x2 mm multilayer or metal-plastic pipe
• Outlet type: internal (female) G1/2 thread for valves and fittings
• Application: potable water and heating systems
• Connection method: GW Press (pressing tool required)
• Joint type: permanent press joint on pipe ends and threaded outlet

How to use

Prepare the 20x2 mm pipe by cutting squarely and deburring the inner and outer edges. Slide the press fitting onto the prepared pipe end until it seats fully against the stop. Position the pressing tool and jaw according to the manufacturer's instructions and perform the press operation on each pipe connection to form the sealed pressed ring joint. After pressing both pipe ends, attach the required valve, adapter or fixture to the G1/2 internal thread and tighten to the specified torque for the accessory. Verify connections visually and by pressure testing the installation according to applicable standards.

Usage recommendations

Use a compatible GW Press tool and correct pressing jaws sized for 20x2 mm pipe to ensure correct forming of the pressed ring. Inspect sealing surfaces and threads for cleanliness before assembly. Follow local codes for potable water and heating installations and perform pressure testing after installation to confirm leak-free operation.