KAN-therm reducing tee 28x22x28 mm steel, model 6240729

KAN-therm reducing tee 28x22x28 mm steel (model 6240729) is a plumbing fitting designed for creating a three-way connection with a stepped reduction at the branch. Manufactured in steel for mechanical strength and dimensional stability, this reducing tee is intended for use in heating and water distribution systems that employ compatible metal pipes with the specified diameters. The fitting allows a main run at 28 mm to branch off to a reduced 22 mm line while maintaining a secure, rigid connection between all three outlets.

Advantages

The steel construction ensures high mechanical durability and resistance to deformation under pressure and temperature changes typical for heating circuits. The reducing tee provides a precise stepped reduction from 28 mm to 22 mm at the branch, simplifying transitions between pipe sizes without additional adapters. Its geometry supports reliable alignment and ease of installation when used with compatible joining methods and connectors.

Suitable for

• Hot and cold water distribution systems with compatible metal pipes
• Central heating circuits where a reduced branch is required
• Plumbing installations requiring a rigid, steel three-way connection
• Retrofit or new-build projects using 28 mm and 22 mm pipe runs

Key specifications

• Material: steel
• Connection pattern: reducing tee with branch reduction
• Dimensions: main run 28 mm × branch 22 mm × opposite run 28 mm
• Application: plumbing and heating distribution with compatible metal pipes
• Function: three-way connection with stepped reduction

How to use

Install the reducing tee by preparing pipe ends to the appropriate cleanliness and dimensional tolerances recommended for the chosen joining method. Align the 28 mm main runs and the 22 mm branch with the fitting, then join using the compatible technique for steel fittings (welding, brazing, or approved mechanical couplings) according to applicable standards and installation practices. Ensure secure supports and proper sealing where required, and perform pressure testing of the system after installation to verify joint integrity.

Usage recommendations

Use the fitting only with pipes and connectors rated for the same operating pressures and temperatures; follow local building codes and manufacturer guidance for joining procedures, support spacing, and system testing.