Compression fitting KAN-therm 25x3.5 mm with G1/2" external thread model 9014.310

KAN-therm compression fitting 25x3.5 mm with G1/2" external thread model 9014.310 is designed to provide a sealed mechanical connection between 25x3.5 mm multilayer or metal-plastic pipe and a G1/2" threaded component. The fitting uses a compression sleeve and nut to create a durable joint without the need for soldering or fusion. It is compatible with common plumbing and heating installations where a reliable threaded outlet is required for valves, taps, or other threaded devices.

Advantages

The compression fitting offers a straightforward mechanical assembly that limits the need for specialized tools. Its design enables fast installation and replacement of components while maintaining leak-tight performance when correctly assembled. The use of a compression sleeve ensures a consistent seal across compatible 25x3.5 mm multilayer and metal-plastic pipes. The external G1/2" thread provides standard compatibility with many valves and fixtures used in domestic and commercial systems.

Suitable for

• Connecting 25x3.5 mm multilayer or metal-plastic pipe to G1/2" threaded valves and fittings
• Domestic and commercial plumbing systems
• Heating circuits and hot-water supply installations
• Replacement or retrofit work where threaded connections are preferred

Key specifications

• Pipe outside diameter: 25 mm
• Pipe wall thickness: 3.5 mm
• Thread type: G1/2" external
• Connection method: compression sleeve and nut
• Compatible pipe materials: multilayer (PEX/AL/PEX) and metal-plastic

How to use

Prepare the pipe by cutting it square and removing any burrs. Slide the compression nut and sleeve onto the pipe, insert the pipe end fully into the fitting body until it seats, then hand-tighten the nut onto the fitting threads. Use an appropriate wrench to tighten the nut to the torque recommended by the pipe and fitting manufacturer to achieve a leak-tight seal. After assembly, check the connection under operating pressure for leaks and re-tighten if necessary within recommended limits.

Usage recommendations

The fitting is intended for use with 25x3.5 mm multilayer and metal-plastic pipes; verify compatibility with pipe manufacturer guidelines and follow installation torque and pressure recommendations. Avoid overtightening the compression nut and ensure pipe ends are clean and properly prepared to maintain seal integrity.