KAN-therm plumbing fitting 40x3.5 with G1 1/4" internal thread K-080097

KAN-therm plumbing fitting 40x3.5 with G1 1/4" internal thread K-080097 is a metal connection element intended for joining pipes with an outer diameter of 40 mm and a wall thickness of 3.5 mm. The fitting provides a female G1 1/4" threaded port for attaching valves, adapters or other threaded components. It is manufactured for use in heating, cooling and plumbing systems where a reliable transition between 40×3.5 pipes and threaded devices is required.

Advantages

The fitting is made of metal to ensure mechanical strength and resistance to pressure typical for domestic and commercial installations. Its G1 1/4" internal thread allows compatibility with a wide range of standard threaded components. The part is suitable for professional installation and repair work, offering a compact solution that reduces the need for additional adapters. The design supports secure sealing with standard thread sealing methods and provides a stable connection to 40×3.5 pipes.

Suitable for

• Connecting 40 mm outer diameter, 3.5 mm wall pipes to threaded valves and devices
• Heating system manifolds and branch connections
• Domestic and commercial plumbing installations
• Repair and replacement of threaded connections on 40×3.5 pipelines

Key specifications

• Material: metal construction suitable for plumbing use
• Pipe compatibility: outer diameter 40 mm, wall thickness 3.5 mm
• Thread type: internal (female) G1 1/4"
• Application: heating, cooling and plumbing systems
• Connection form: pipe-to-thread transition fitting

How to use

Prepare the pipe end by deburring and ensuring a clean, square cut. Slide the fitting onto the 40×3.5 pipe end according to the connection method specified for the system (press-fit, compression, or other compatible joining technique). Apply appropriate sealing material to the internal G1 1/4" thread if required by the mating component, then screw in the threaded device until hand-tight and complete the final tightening with suitable tooling to the torque recommended for the connected part. After assembly, check the joint for leaks and proper alignment before putting the system into service.

Usage recommendations

Use compatible thread sealing (PTFE tape or thread sealant) and follow system pressure and temperature limits. For best results, perform installation with standard plumbing tools and test the assembled connection at working pressure. If uncertain about compatibility or installation technique, consult technical documentation or a professional installer.