KAN-therm connector 63x63 with press ring model K-900206

KAN-therm connector 63x63 with press ring model K-900206 is a press-fit plumbing component designed for joining 63 mm piping in heating and water installations. The connector provides a metal-to-metal junction with a dedicated press ring that is deformed by a pressing tool to form a permanent, leak-resistant joint. It is manufactured for compatibility with systems that use press technology, enabling reliable connections where soldering or welding is not desired or practical.

Advantages

The press ring design ensures uniform compression around the pipe, reducing the risk of uneven joints and leaks. As a mechanical connection, the connector speeds up installation compared with traditional welded or soldered joints and eliminates the need for open flame work. Tight tolerances and material selection contribute to long-term durability and resistance to typical plumbing stresses in domestic and commercial systems.

Suitable for

• Installation of 63 mm heating system pipes
• Domestic and commercial potable water supply lines
• Retrofit and replacement of existing press-fit pipe joints
• Applications where flame-free installation is required or preferred

Key specifications

• Connection size: 63 mm × 63 mm
• Joint type: press-fit with crimpable press ring
• Intended use: heating and water installations
• Material: metal construction compatible with press fittings (manufacturer grade)
• Installation method: pressing using compatible press tool and jaw

How to use

Select pipes with clean, square-cut ends and ensure they are free of debris or burrs. Slide the press ring onto the pipe, insert the pipe fully into the connector socket until the stop, then position the press jaw over the ring at the recommended location. Operate the compatible pressing tool according to the tool manufacturer's instructions to deform the ring and create the pressed joint. After pressing, visually inspect the connection for correct deformation and alignment before system pressurization.

Usage recommendations

Use only press tools and jaws approved for 63 mm fittings and follow applicable installation standards and local regulations. Verify compatibility with pipe material and system pressure ratings. Perform pressure tests after installation to confirm leak-tightness.