KAN-therm elbow GZ Press 90° with press ring 32x3 G1" model K-901003

KAN-therm elbow GZ Press 90° with press ring 32x3 G1" model K-901003 is a press-fit 90-degree elbow fitting designed for reliable connections in potable water, heating and plumbing systems. The fitting provides a compact right-angle change of direction for pipes with an outer dimension of 32x3 and includes a G1" threaded outlet suitable for attaching valves, gauges or other threaded components. Constructed to work within press-fit installation workflows, this elbow combines a press connection on the pipe side with a threaded port for system accessories.

Advantages

The press ring ensures a consistent, gas- and water-tight press connection when installed with compatible press tools and jaws, reducing reliance on soldering or welding. The integrated G1" threaded outlet allows direct attachment of valves or measuring instruments, simplifying assembly and maintenance. The compact 90° geometry minimizes space requirements while maintaining flow characteristics suitable for domestic and commercial plumbing circuits.

Suitable for

• Potable water distribution systems
• Heating installations including radiators and underfloor systems
• Plumbing assemblies where a threaded connection for valves or instruments is required
• Renovation projects requiring reliable press-fit joints without open-flame work

Key specifications

• Connection type: press-fit on pipe side with press ring; threaded outlet G1"
• Pipe outer dimension: 32 x 3 mm
• Angle: 90 degrees
• Material compatibility: designed for common metal-plastic and metal pipe systems handled by KAN-therm press fittings (verify material pairing before installation)
• Application areas: potable water, heating and general plumbing

How to use

Prepare the pipe by cutting it square and deburring the inner and outer edges. Slide the press ring or ensure the press ring is positioned as required by the fitting design, then insert the pipe fully into the press connection until it reaches the depth stop. Use the appropriate compatible press tool and jaw for the 32x3 press connection and perform the press cycle according to the tool manufacturer's instructions. For the G1" threaded outlet, apply an appropriate thread sealant or tape if required by the component you attach, then tighten the valve or instrument to the recommended torque. After assembly, verify the pressed joint visually and, where applicable, perform pressure testing according to local codes and standards.

Usage recommendations

Use certified press tools and jaws sized for 32x3 press fittings. Confirm compatibility of the piping material with KAN-therm press fittings and follow local regulations for potable water and heating installations. Where applicable, perform a pressure test after installation and before putting the system into service.